Characterization and Wear Behavior of Heat-treated Ni3Al Coatings Deposited by Air Plasma Spraying

被引:8
作者
Mehmood, K. [1 ]
Rafiq, M. A. [1 ]
Khan, A. Nusair [2 ]
Ahmed, F. [1 ]
Rauf, M. Mudassar [2 ]
机构
[1] Univ Engn & Technol, Met & Mat Engn Dept, Lahore, Pakistan
[2] Inst Ind Control Syst, Rawalpindi, Pakistan
关键词
air plasma spraying; characterization; isothermal treatment; nickel aluminide; wear behavior; CAVITATION EROSION; CORROSION BEHAVIOR; HOT CORROSION; RESISTANCE; NICKEL; NI; FRICTION; CARBIDE; ALLOYS; DRY;
D O I
10.1007/s11665-016-2120-6
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Air plasma spraying was utilized to deposit Ni3Al coatings on AISI-321 steel substrate. The deposited coatings were isothermally heat-treated at various temperatures from 500 to 800 A degrees C for 10, 30, 60, and 100 h. The x-ray diffraction analysis revealed NiO formation in Ni3Al at 500 A degrees C after 100 h, and the percentage of NiO increased with increasing exposure time and temperature. The hardness of the coating increased with the formation of NiO. The DSC test showed the formation of minor phases, Al3Ni and Al3Ni2, within the coating along with the major phase Ni3Al. TGA revealed a slowing down of the oxidation rate upon surface oxide formation. The pin-on-disk wear test on the as-sprayed and heat-treated coatings showed that wear rate and coefficient of friction decreased with an increase in the NiO phase content.
引用
收藏
页码:2752 / 2760
页数:9
相关论文
共 40 条
[21]  
LIU CT, 1995, INTERMETALLIC COMPOU, V2, P17
[22]   High-temperature oxidation behavior of aluminide coatings on a new cobalt-base superalloy in air [J].
Liu, PS ;
Liang, KM ;
Gu, SR .
CORROSION SCIENCE, 2001, 43 (07) :1217-1226
[23]  
Malik A. U., 1992, Praktische Metallographie, V29, P255
[24]   ENVIRONMENTAL RESISTANCE OF PURE AND ALLOYED GAMMA 'NI3 AL AND BETA-NIAL [J].
MCCARRON, RL ;
LINDBLAD, NR ;
CHATTERJI, D .
CORROSION, 1976, 32 (12) :476-481
[25]   Neural Network Analysis for Erosion Wear of Nickel-Aluminide Coatings on Steel by Plasma Spraying [J].
Mishra, S. C. ;
Chaithanya, M. ;
Satapathy, Alok ;
Ananthapadmanabhan, P. V. ;
Sreekumar, K. P. .
23RD NATIONAL SYMPOSIUM ON PLASMA SCIENCE AND TECHNOLOGY (PLASMA-2008), 2010, 208
[26]  
Natesan K., 1988, MATER SCI ENG, V30, P53
[27]  
NICOLL AR, 1986, MATER SCI TECH SER, V2, P214, DOI 10.1179/026708386790123413
[28]   Friction and Wear Performance of Titanium Alloys against Tungsten Carbide under Dry Sliding and Water Lubrication [J].
Niu, Q. L. ;
Zheng, X. H. ;
Ming, W. W. ;
Chen, M. .
TRIBOLOGY TRANSACTIONS, 2013, 56 (01) :101-108
[29]   FUNDAMENTAL-STUDIES ASSOCIATED WITH THE PLASMA SPRAY PROCESS [J].
PFENDER, E .
SURFACE & COATINGS TECHNOLOGY, 1988, 34 (01) :1-14
[30]  
ROSSO M, 1998, PM WORLD C THERM SPR, P524