Nitrogen Effect on the Microstructure and Mechanical Properties of Nickel Alloys

被引：1

作者：

Nabavi, B. ^{[1
]}

Goodarzi, M. ^{[1
]}

Amani, V. ^{[2
]}

机构：

[1] Iran Univ Sci & Technol, Sch Met & Mat Engn, Tehran, Iran

[2] Univ Tehran, Coll Engn, Sch Met & Mat Engn, Tehran, Iran

来源：

WELDING JOURNAL | 2015年 / 94卷 / 02期

关键词：

Nitrogen; Alloy; 263; Alloy X; Gas Tungsten Arc Welding (GTAW); Equiaxed Dendrites; Ultimate Tensile Strength (UTS); STAINLESS-STEEL WELDMENTS; HIGH-TEMPERATURE BEHAVIOR; NI-BASE SUPERALLOY; PHASE PRECIPITATION; LIQUID NICKEL; HASTELLOY-X; WELD METAL; CRACKING; CARBIDE; SOLUBILITY;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

In this research, the effects of nitrogen addition in Ar gas on weld metal microstructure and mechanical properties of Alloy 263 (UNS N07263) and Alloy X (UNS N06002) were studied. Autogenous gas tungsten arc welding (GTAW) was employed by adding 0-4 vol-% N-2 in Ar. Welding speed and heat input rate were measured as functions of gas composition. The weld metal microstructure was studied by optical and scanning electron microscopy. Experimental results demonstrated that the dendritic structure of the weld was refined by increasing N-2 in Ar for both alloys. An addition of 4 vol-% N-2 to Ar decreased significantly the columnar region in Alloy 263 fusion zone (FZ), while no similar change was observed in Alloy X. This difference is discussed based on microstructural characterization. Finally, it was found that the tensile strength and hardness have been augmented with increased nitrogen in the shielding gas.

引用

页码：53S / 60S

页数：8

共 50 条

[1] Effect of Nickel Addition on Microstructure and Mechanical Properties of Aluminum-Based Alloys
Hernandez-Mendez, F.
Altamirano-Torres, A.
Miranda-Hernandez, Jose
Terres-Rojas, E.
Rocha-Rangel, E.
METASTABLE AND NANOSTRUCTURED MATERIALS IV, 2011, 691 : 10 - +
[2] Effect of nitrogen content on the microstructure and mechanical properties of a cast nickel-base superalloy
Guo, X. L.
Yu, J. B.
Li, X. F.
Hou, Y.
Ren, Z. M.
IRONMAKING & STEELMAKING, 2018, 45 (03) : 215 - 223
[3] Effect of heat input on microstructure and mechanical properties of laser welded dissimilar grade nickel alloys
Kumar, G. Shanthos
Saravanan, S.
Raghukandan, K.
OPTIK, 2021, 248
[4] Effect of Ca on the Microstructure and Mechanical Properties in Mg Alloys
Andritsos, E., I
Skinner, G. C. G.
Paxton, A. T.
MAGNESIUM TECHNOLOGY 2018, 2018, : 63 - 69
[5] Effect of manganese on the microstructure and mechanical properties of magnesium alloys
Yu, Zhengwen
Tang, Aitao
Li, Caiyu
Liu, Jianguo
Pan, Fusheng
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2019, 110 (11) : 1016 - 1024
[6] Effect of texture and microstructure on the mechanical properties of Zn alloys
Philippe, M.J.
Beaujean, I.
Bouzy, E.
Diot, M.
Wegria, J.
Esling, C.
Materials Science Forum, 1994, 157-6 (pt 2) : 1671 - 1680
[7] Effect of oxygen and nitrogen on microstructure and mechanical properties of vanadium
Jo, Min-Gu
Madakashira, Phaniraj P.
Suh, Jin-Yu
Han, Heung Nam
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 675 : 92 - 98
[8] Densification behaviour and the effect of heat treatment on microstructure, and mechanical properties of sintered nickel-based alloys
Kekana, Neo
Shongwe, Mxolisi B.
Johnson, Oluwagbenga T.
Babalola, Bukola J.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 103 (5-8): : 2227 - 2233
[9] Densification behaviour and the effect of heat treatment on microstructure, and mechanical properties of sintered nickel-based alloys
Neo Kekana
Mxolisi B. Shongwe
Oluwagbenga T. Johnson
Bukola J. Babalola
The International Journal of Advanced Manufacturing Technology, 2019, 103 : 2227 - 2233
[10] EFFECT OF NITROGEN ADDITION ON THE MICROSTRUCTURE AND MECHANICAL-PROPERTIES OF CAST GAMMA-TITANIUM ALUMINIDE ALLOYS
YUKI, I
AMANO, N
UOZUMI, M
INUI, H
YAMAGUCHI, M
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1994, 58 (05) : 564 - 570

← 1 2 3 4 5 →