Effect of microwave disinfection on mechanical properties of denture base acrylic resin

被引:23
|
作者
Hamouda, Ibrahim M. [1 ]
Ahmed, Sabry A. [2 ]
机构
[1] Mansoura Univ, Fac Dent, Mansoura, Egypt
[2] Zagazig Univ, Fac Engn, Zagazig, Egypt
关键词
Acrylic resin; Disinfection; Mechanical properties; Flexural properties; Toughness; Impact strength; CHEMICAL DISINFECTANTS; RELINE; STRENGTH;
D O I
10.1016/j.jmbbm.2010.05.002
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
The microwave oven was used for sterilizing dentures contaminated with Candida albicans and other communicable diseases instead of disinfectant solutions. This study was carried out to evaluate the flexural properties, toughness, and impact strength of heat-cured acrylic resin sterilized by microwave oven either immersed in water or non-immersed for 5 and 15 min at full power. The results indicated that the microwave oven sterilization technique resulted in reduction of the load necessary to fracture the specimens, deformation at fracture, transverse strength, modulus of elasticity except disinfection at 5 min dry condition, toughness, and impact strength. This study concluded that the microwave oven is not acceptable for sterilization of dentures because of its weakening effects on the dentures that prone for fracture during clinical use. This method of sterilization increased the brittleness of acrylic resin specimens. (c) 2010 Elsevier Ltd. All rights reserved.
引用
收藏
页码:480 / 487
页数:8
相关论文
共 50 条
  • [31] Influence of a new denture cleaning technique based on photolysis of H2O2 on the mechanical properties and color change of acrylic denture base resin
    Nakahara, Tatsuro
    Harada, Akio
    Yamada, Yasutomo
    Odashima, Yu
    Nakamura, Keisuke
    Inagaki, Ryoichi
    Kanno, Taro
    Sasaki, Keiichi
    Niwano, Yoshimi
    DENTAL MATERIALS JOURNAL, 2013, 32 (04) : 529 - 536
  • [32] Influence of Reinforcing Agents on the Mechanical Properties of Denture Base Resin: A Systematic Review
    Aldegheishem, Alhanoof
    AlDeeb, Mohi
    Al-Ahdal, Khold
    Helmi, Mohammad
    Alsagob, Eman, I
    POLYMERS, 2021, 13 (18)
  • [33] Mechanical properties of denture base resin cross-linked with methacrylated dendrimer
    Kawaguchi, Tomohiro
    Lassila, Lippo V. J.
    Vallittu, Pekka K.
    Takahashi, Yutaka
    DENTAL MATERIALS, 2011, 27 (08) : 755 - 761
  • [34] Bond Strength of Reinforced Autopolymerized Acrylic Resin to Denture Base Resin
    Aimjirakul, Napapa
    Apimanchindakul, Chavinee
    Mahardawi, Basel
    Nan, Pheeradej Na
    Wimonchit, Suwit
    Wongsirichat, Natthamet
    INTERNATIONAL JOURNAL OF BIOMATERIALS, 2023, 2023
  • [35] The effect of aging on hardness of heat cured denture base resin modified with recycled acrylic resin
    AL-Jmmal, Amrah Y.
    Mohammed, Nada Z.
    AL-kateb, Hala M.
    CLINICAL AND EXPERIMENTAL DENTAL RESEARCH, 2024, 10 (01):
  • [36] The Effect of Repeated Microwave Irradiation on the Dimensional Stability of a Specific Acrylic Denture Resin
    Wagner, David A.
    Pipko, Donald J.
    JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY, 2015, 24 (01): : 25 - 31
  • [37] The Effect of Microwave Disinfection on Denture Base Polymers, Liners and Teeth: A Basic Overview
    Klironomos, Theodoros
    Katsimpali, Aspasia
    Polyzois, Gregory
    ACTA STOMATOLOGICA CROATICA, 2015, 49 (03) : 242 - 253
  • [38] Cumulative effect of disinfection procedures on microhardness and tridimensional stability of a poly(methyl methacrylate) denture base resin
    Sartori, Evandro Afonso
    Schmidt, Caroline Bom
    Mota, Eduardo Goncalves
    Hirakata, Luciana Mayumi
    Arai Shinkai, Rosemary Sadami
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2008, 86B (02) : 360 - 364
  • [39] Fatigue resistance of acrylic resin denture base material reinforced with E-glass fibres
    Gurbuz, Ozlem
    Dikbas, Idil
    Unalan, Fatma
    GERODONTOLOGY, 2012, 29 (02) : E710 - E714
  • [40] Effect of Chitosan and Acrylic Acid Addition to Acrylic Resin on Porosity and Streptococcus mutans Growth in Denture Base
    Ismiyati, Titik
    Alhasyimi, Ananto Ali
    EUROPEAN JOURNAL OF DENTISTRY, 2023, 17 (03) : 693 - 698