Effect of microwave disinfection on mechanical properties of denture base acrylic resin

被引:23
|
作者
Hamouda, Ibrahim M. [1 ]
Ahmed, Sabry A. [2 ]
机构
[1] Mansoura Univ, Fac Dent, Mansoura, Egypt
[2] Zagazig Univ, Fac Engn, Zagazig, Egypt
关键词
Acrylic resin; Disinfection; Mechanical properties; Flexural properties; Toughness; Impact strength; CHEMICAL DISINFECTANTS; RELINE; STRENGTH;
D O I
10.1016/j.jmbbm.2010.05.002
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
The microwave oven was used for sterilizing dentures contaminated with Candida albicans and other communicable diseases instead of disinfectant solutions. This study was carried out to evaluate the flexural properties, toughness, and impact strength of heat-cured acrylic resin sterilized by microwave oven either immersed in water or non-immersed for 5 and 15 min at full power. The results indicated that the microwave oven sterilization technique resulted in reduction of the load necessary to fracture the specimens, deformation at fracture, transverse strength, modulus of elasticity except disinfection at 5 min dry condition, toughness, and impact strength. This study concluded that the microwave oven is not acceptable for sterilization of dentures because of its weakening effects on the dentures that prone for fracture during clinical use. This method of sterilization increased the brittleness of acrylic resin specimens. (c) 2010 Elsevier Ltd. All rights reserved.
引用
收藏
页码:480 / 487
页数:8
相关论文
共 50 条
  • [21] The effect of untreated UHMWPE beads on some properties of acrylic resin denture base material
    Carlos, NB
    Harrison, A
    JOURNAL OF DENTISTRY, 1997, 25 (01) : 59 - 64
  • [22] Novel acrylic resin denture base with enhanced mechanical properties by the incorporation of PMMA-modified hydroxyapatite
    Yingying Pan
    Fengwei Liu
    Dan Xu
    Xiaoze Jiang
    Hao Yu
    Meifang Zhu
    ProgressinNaturalScience:MaterialsInternational, 2013, 23 (01) : 89 - 93
  • [23] Novel acrylic resin denture base with enhanced mechanical properties by the incorporation of PMMA-modified hydroxyapatite
    Pan, Yingying
    Liu, Fengwei
    Xu, Dan
    Jiang, Xiaoze
    Yu, Hao
    Zhu, Meifang
    PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL, 2013, 23 (01) : 89 - 93
  • [24] Effect of Curing Cycle on the Tensile Strength of the Bond Between Heat Cured Denture Base Acrylic Resin and Acrylic Resin Denture Teeth
    Dalal, Ayesha
    Juszczyk, Andrzej S.
    Radford, David R.
    Clark, Robert K. F.
    EUROPEAN JOURNAL OF PROSTHODONTICS AND RESTORATIVE DENTISTRY, 2009, 17 (04) : 146 - 149
  • [25] Reinforcement of acrylic denture base resin by incorporation of various fibers
    Chen, SY
    Liang, WM
    Yen, PS
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 2001, 58 (02): : 203 - 208
  • [26] Effect of the incorporation of cellulose nanocrystals into a microwave-polymerized denture base resin: Cellulose nanocrystals into a denture base resin
    Santana, Thais de Sousa
    Leite, Andressa Rosa Perin
    Pasquini, Daniel
    Pero, Ana Carolina
    STARCH-STARKE, 2022, 74 (3-4):
  • [27] Antibacterial and Mechanical Performance of Nano Selenium Reinforced Acrylic Denture base
    Jani, Ghasak H.
    Mohialdeen, Hasan K.
    Alheeti, Osama A. R.
    PAKISTAN JOURNAL OF MEDICAL & HEALTH SCIENCES, 2021, 15 (01): : 320 - 324
  • [29] Effect of denture cleansers on physical properties of heat-polymerized acrylic resin
    Peracini, Amanda
    Davi, Leticia Resende
    Ribeiro, Nathalia de Queiroz
    de Souza, Raphael Freitas
    Lovato da Silva, Claudia Helena
    Oliveira Paranhos, Helena de Freitas
    JOURNAL OF PROSTHODONTIC RESEARCH, 2010, 54 (02) : 78 - 83
  • [30] The Effect of Experimental Denture Cleanser Solution Ricinus communis on Acrylic Resin Properties
    Pisani, Marina Xavier
    Lovato da Silva, Claudia Helena
    Oliveira Paranhos, Helena de Freitas
    Souza, Raphael Freitas
    Macedo, Ana Paula
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2010, 13 (03): : 369 - 373