Progress in the Design of the DTT Electrical Distribution System

被引：0
|
作者：
Caldora, Marzia [1 ]
Minucci, Simone [2 ]
Greco, Gabriele [2 ]
Lampasi, Alessandro [3 ,4 ]
Romano, Roberto [3 ,4 ]
Falvo, Maria Carmen [1 ]
机构：
[1] Sapienza Univ Rome, Rome, Italy
[2] Univ Tuscia, Viterbo, Italy
[3] ENEA, Frascati, Italy
[4] DTT Scarl, Frascati, Italy
来源：
2022 IEEE 21ST MEDITERRANEAN ELECTROTECHNICAL CONFERENCE (IEEE MELECON 2022) | 2022年
关键词：
Divertor Tokamak Test (DTT); fault analysis; nuclear fusion; power system; power flow; short circuit;
D O I：
10.1109/MELECON53508.2022.9842958
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
The Divertor Tokamak Test (DTT) facility is a key project for the exploitation of nuclear fusion as a sustainable source of energy. The accomplishment of this goal necessarily passes through the appropriate design of the Electrical Distribution System (EDS) managing the power, flowing from the national grid to the loads required for the facility operation. This design is not trivial due to the huge amount of power, the high number of loads with different characteristics and the inherent discontinuity of the operation. The objective of this paper is to present a general overview of the development on DTT EDS. Its architecture and design are based on the results obtained by Power Flow and Fault Analyses, implementing simulation models. The main criticalities and open issues are pointed out for future improvements and to provide guidelines useful for other similar facilities.
引用
收藏
页码：501 / 505
页数：5
相关论文
共 50 条
  • [1] Progress of DTT ECRH system design
    Garavaglia, S.
    Baiocchi, B.
    Bruschi, A.
    Busi, D.
    Fanale, F.
    Figini, L.
    Granucci, G.
    Moro, A.
    Platania, P.
    Rispoli, N.
    Romano, A.
    Salvitti, A.
    Sartori, E.
    Schmuck, S.
    Vassallo, E.
    FUSION ENGINEERING AND DESIGN, 2021, 168
  • [2] Design progress of DTT divertor fixation system
    Marzullo, D.
    Massanova, N.
    Giorgetti, F.
    Riccardi, B.
    De Sano, G.
    Roccella, S.
    FUSION ENGINEERING AND DESIGN, 2024, 203
  • [3] The DTT device: Power supplies and electrical distribution system
    Lampasi, Alessandro
    Zito, Pietro
    Starace, Fabio
    Costa, Pietro
    Maffia, Giuseppe
    Minucci, Simone
    Gaio, Elena
    Toigo, Vanni
    Zanotto, Loris
    Ciattaglia, Sergio
    FUSION ENGINEERING AND DESIGN, 2017, 122 : 356 - 364
  • [4] Progress on the conceptual design of the antennas for the DTT ECRH system
    Fanale, F.
    Baiocchi, B.
    Bruschi, A.
    Busi, D.
    Bussolan, A.
    Figini, L.
    Garavaglia, S.
    Granucci, G.
    Romano, A.
    FUSION ENGINEERING AND DESIGN, 2023, 192
  • [5] Progress in the development of the ICRF system of DTT
    Ceccuzzi, S.
    Aquilini, M.
    Badodi, N.
    Bonaventura, A.
    Boncagni, L.
    Camera, G.
    Cardinali, A.
    Casalegno, V.
    Castaldo, C.
    Cioffi, A.
    Di Gironimo, G.
    Di Paolo, F.
    Ferraris, M.
    Francalanza, V.
    Galindo-Huertas, D.L.
    Granucci, G.
    Greco, S.
    Grespan, F.
    Lanzotti, F.G.
    Liuzza, D.
    Maddaluno, G.
    Maccari, P.
    Marinari, R.
    Marino, F.
    Mascali, D.
    Mauro, G.S.
    Milanesio, D.
    Mirizzi, F.
    Palmieri, A.
    Pepato, A.
    Petrolini, P.
    Pidatella, A.
    Piras, S.
    Pollastrone, F.
    Ponti, C.
    Raspante, B.
    Ravera, G.L.
    Rocchi, A.
    Romano, R.
    Salvia, C.
    Schettini, G.
    Spinella, G.
    Torrisi, G.
    Tuccillo, A.A.
    Tudisco, O.
    Turganbaev, A.
    Valletti, L.
    Van Eester, D.
    Vecchi, G.
    Venneri, I.
    Fusion Engineering and Design, 2025, 213
  • [6] Progress and challenges of the ECH transmission line design for DTT
    Moro, A.
    Bruschi, A.
    Fanale, F.
    Fanelli, P.
    Gajetti, E.
    Garavaglia, S.
    Granucci, G.
    Meloni, S.
    Pepato, A.
    Platania, P.
    Romano, A.
    Salvitti, A.
    Savoldi, L.
    Schmuck, S.
    Scungio, M.
    Simonetto, A.
    Turcato, M.
    Vassallo, E.
    FUSION ENGINEERING AND DESIGN, 2024, 202
  • [7] Preliminary Design of the Electrical Power Systems for DTT Nuclear Fusion Plant
    Caldora, Marzia
    Falvo, Maria Carmen
    Lampasi, Alessandro
    Marelli, Gianluca
    APPLIED SCIENCES-BASEL, 2021, 11 (12):
  • [8] DTT device: Conceptual design of the superconducting magnet system
    Di Zenobio, A.
    Albanese, R.
    Anemona, A.
    Biancolini, M. E.
    Bonifetto, R.
    Brutti, C.
    Corato, V.
    Crisanti, F.
    della Corte, A.
    De Marzi, G.
    Zignani, C. Fiamozzi
    Giorgetti, F.
    Messina, G.
    Muzzi, L.
    Savoldi, L.
    Tomassetti, G.
    Turtu, S.
    Villone, F.
    Zappatore, A.
    FUSION ENGINEERING AND DESIGN, 2017, 122 : 299 - 312
  • [9] Preliminary conceptual design of the DTT EC heating system
    Garavaglia, Saul
    Granucci, Gustavo
    Bruschi, Alessandro
    Fanale, Francesco
    Farina, Daniela
    Figini, Lorenzo
    Moro, Alessandro
    Nowak, Silvana
    Ricci, Daria
    FUSION ENGINEERING AND DESIGN, 2019, 146 : 203 - 206
  • [10] System level design of the Tangential visible and infrared viewing system for DTT
    Vives, S.
    Aumeunier, M. -H
    Courtois, X.
    Dubus, L.
    Alonzo, M.
    Iafrati, M.
    FUSION ENGINEERING AND DESIGN, 2025, 215
12345