Analysis of the Influence of Accelerometer Quality and Installation Position on the Test Value of Wood Material Constant

被引：5

作者：

Zhang, Y. ^{[1
]}

Zhu, H. ^{[1
]}

Wang, Z. ^{[1
]}

Dauletbek, A. ^{[2
]}

机构：

[1] Nanjing Forestry Univ, Coll Mat Sci & Engn, Nanjing 210037, Peoples R China

[2] Nanjing Forestry Univ, Coll Civil Engn, Nanjing 210037, Peoples R China

来源：

EXPERIMENTAL TECHNIQUES | 2022年 / 46卷 / 05期

关键词：

Accelerometer; Quality; Installation position; Frequency; Dynamic measurement; Elastic modulus; Shear modulus; SHEAR MODULUS;

D O I：

10.1007/s40799-021-00512-x

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

To consider the influence of the quality of the accelerometer and the installation position on the test frequency, a test scheme was designed to identify the first-order bending frequency with free and cantilever beams as well as the first-order torsion frequency with free plates. According to the energy method and mode shape, the correction relationship between the elastic modulus and the first-order bending frequency of free and cantilever beams is derived alongside the relationship between the shear modulus and first-order torsion frequency of a free plate. These relationships are suitable for informing the influence of the accelerometer mass and installation. The first-order bending frequency and the first-order torsion frequency of Sitka spruce beams, slabs, and oriented strand board have been measured along the length, which verifies the effectiveness of the derived relation in testing the elastic modulus and shear modulus of wood materials. Taking the ratio m/M between the mass of the accelerometer and the mass of the test specimen as a parameter, the scope of application of the modified relation is discussed.

引用

页码：745 / 759

页数：15

共 21 条

[1] Dynamic determination of modulus of elasticity of full-size wood composite panels using a vibration method [J].

Guan, Cheng ;

Zhang, Houjiang ;

Zhou, Lujing ;

Wang, Xiping .

CONSTRUCTION AND BUILDING MATERIALS, 2015, 100 :201-206

[2]

Hu YingCheng Hu YingCheng, 2001, China Wood Industry, V15, P3

[3] Dynamic MOE of 55 species using small wood beams [J].

Ilic, J .

HOLZ ALS ROH-UND WERKSTOFF, 2003, 61 (03) :167-172

[4]

Jin, 2005, WOOD BASED PANELS

[5] Slenderness Ratio Effect on Eccentric Compression Properties of Parallel Bamboo Strand Lumber Columns [J].

Li, Haitao ;

Qiu, Zhenyu ;

Wu, Gang ;

Corbi, Ottavia ;

Wei, Dongdong ;

Wang, Libin ;

Corbi, Ileana ;

Yuan, Conggan .

JOURNAL OF STRUCTURAL ENGINEERING, 2019, 145 (08)

[6]

Liu H, 2017, PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2016, VOL. 4B

[7] Bimodulus bending model for bamboo poles [J].

Lorenzo, Rodolfo ;

Mimendi, Leonel ;

Li, Haitao ;

Yang, Dong .

CONSTRUCTION AND BUILDING MATERIALS, 2020, 262

[8] Correction of Transducers Mass Effects from the Measured FRFs in Hammer Impact Testing [J].

Ren, Jun ;

Wang, Jun ;

Bi, Shusheng .

SHOCK AND VIBRATION, 2017, 2017

[9]

Timoshenko, 1965, MECH VIBR SCI, P316

[10]

Ventsel E., 2001, THIN PLATES SHELLS T, DOI DOI 10.1201/9780203908723

← 1 2 3 →