Incompatible deformation and damage evolution of mixed strata specimens containing a circular hole

被引:4
作者
Yang, Shuo [1 ]
Li, Yuanhai [1 ,2 ]
Chen, Miao [3 ]
Liu, Jinshan [1 ,2 ]
机构
[1] China Univ Min & Technol, State Key Lab Geomech & Deep Underground Engn, Xuzhou 221116, Jiangsu, Peoples R China
[2] China Univ Min & Technol, Sch Mech & Civil Engn, Xuzhou 221116, Jiangsu, Peoples R China
[3] Shandong Univ Sci & Technol, State Key Lab Mine Disaster Prevent & Control, Qingdao 266590, Peoples R China
基金
中国国家自然科学基金;
关键词
circular hole; mixed strata; incompatible deformation; damage evolution; failure mode; NUMERICAL-SIMULATION; FAILURE-MECHANISM; ROCK; TUNNEL; FRACTURE; COAL; EXCAVATION; STRENGTH; BEHAVIOR; MODEL;
D O I
10.12989/gae.2020.20.5.461
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Analysing the incompatible deformation and damage evolution around the tunnels in mixed strata is significant for evaluating the tunnel stability, as well as the interaction between the support system and the surrounding rock mass. To investigate this issue, confined compression tests were conducted on upper-soft and lower-hard strata specimens containing a circular hole using a rock testing system, the physical mechanical properties were then investigated. Then, the incompatible deformation and failure modes of the specimens were analysed based on the digital speckle correlation method (DSCM) and Acoustic Emission (AE) data. Finally, numerical simulations were conducted to explore the damage evolution of the mixed strata. The results indicate that at low inclination angles, the deformation and v-shaped notches inside the hole are controlled by the structure plane. Progressive spalling failure occurs at the sidewalls along the structure plane in soft rock. But the transmission of the loading force between the soft rock and hard rock are different in local. At high inclination angles, v-shaped notches are approximately perpendicular to the structure plane, and the soft and hard rock bear common loads. Incompatible deformation between the soft rock and hard rock controls the failure process. At inclination angles of 0 degrees, 30 degrees and 90 degrees, incompatible deformations are closely related to rock damage. At 60 degrees, incompatible deformations and rock damage are discordant due that the soft rock and hard rock alternately bears the major loads during the failure process. The failure trend and modes of the numerical results agree very well with those observed in the experimental results. As the inclination angles increase, the proportion of the shear or tensile damage exhibits a nonlinear increase or decrease, suggesting that the inclination angle of mixed strata may promote shear damage and restrain tensile damage.
引用
收藏
页码:461 / 474
页数:14
相关论文
共 39 条
  • [21] A numerical study of shear-induced evolutions of geometric and hydraulic properties of self-affine rough-walled rock fractures
    Liu, Richeng
    Huang, Na
    Jiang, Yujing
    Jing, Hongwen
    Yu, Liyuan
    [J]. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2020, 127
  • [22] Modeling linear and nonlinear fluid flow through sheared rough-walled joints taking into account boundary stiffness
    Liu, Richeng
    Wang, Changsheng
    Li, Bo
    Jiang, Yujing
    Jing, Hongwen
    [J]. COMPUTERS AND GEOTECHNICS, 2020, 120
  • [23] Seventeenth Canadian geotechnical colloquium: The effect of cohesion loss and stress path on brittle rock strength
    Martin, CD
    [J]. CANADIAN GEOTECHNICAL JOURNAL, 1997, 34 (05) : 698 - 725
  • [24] [孟召平 MENG Zhaoping], 2009, [煤田地质与勘探, Coal Geology & Exploration], V37, P33
  • [25] Evaluation of higher capacity segmental lining systems when tunnelling in squeezing rock
    Mezger, F.
    Ramoni, M.
    Anagnostou, G.
    Dimitrakopoulos, A.
    Meystre, N.
    [J]. TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY, 2017, 65 : 200 - 214
  • [26] Experimental investigation of the Rock-Concrete bi materials influence of inclined interface on strength and failure behavior
    Selcuk, Levent
    Asma, Derya
    [J]. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2019, 123
  • [27] An experimental investigation of the failure mechanism of simulated transversely isotropic rocks
    Tien, Yong Ming
    Kuo, Ming Chuan
    Juang, Charng Hsein
    [J]. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2006, 43 (08) : 1163 - 1181
  • [28] Case studies of TBM tunneling performance in rock-soil interface mixed ground
    Toth, Akos
    Gong, Qiuming
    Zhao, Jian
    [J]. TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY, 2013, 38 : 140 - 150
  • [29] Numerical simulation of the failure mechanism of circular tunnels in transversely isotropic rock masses
    Wang, S. Y.
    Sloan, S. W.
    Tang, C. A.
    Zhu, W. C.
    [J]. TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY, 2012, 32 : 231 - 244
  • [30] On Anisotropic Fracture Evolution and Energy Mechanism During Marble Failure Under Uniaxial Deformation
    Wang, Y.
    Tan, W. H.
    Liu, D. Q.
    Hou, Z. Q.
    Li, C. H.
    [J]. ROCK MECHANICS AND ROCK ENGINEERING, 2019, 52 (10) : 3567 - 3583