Incompatible deformation and damage evolution of mixed strata specimens containing a circular hole

被引:4
作者
Yang, Shuo [1 ]
Li, Yuanhai [1 ,2 ]
Chen, Miao [3 ]
Liu, Jinshan [1 ,2 ]
机构
[1] China Univ Min & Technol, State Key Lab Geomech & Deep Underground Engn, Xuzhou 221116, Jiangsu, Peoples R China
[2] China Univ Min & Technol, Sch Mech & Civil Engn, Xuzhou 221116, Jiangsu, Peoples R China
[3] Shandong Univ Sci & Technol, State Key Lab Mine Disaster Prevent & Control, Qingdao 266590, Peoples R China
基金
中国国家自然科学基金;
关键词
circular hole; mixed strata; incompatible deformation; damage evolution; failure mode; NUMERICAL-SIMULATION; FAILURE-MECHANISM; ROCK; TUNNEL; FRACTURE; COAL; EXCAVATION; STRENGTH; BEHAVIOR; MODEL;
D O I
10.12989/gae.2020.20.5.461
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Analysing the incompatible deformation and damage evolution around the tunnels in mixed strata is significant for evaluating the tunnel stability, as well as the interaction between the support system and the surrounding rock mass. To investigate this issue, confined compression tests were conducted on upper-soft and lower-hard strata specimens containing a circular hole using a rock testing system, the physical mechanical properties were then investigated. Then, the incompatible deformation and failure modes of the specimens were analysed based on the digital speckle correlation method (DSCM) and Acoustic Emission (AE) data. Finally, numerical simulations were conducted to explore the damage evolution of the mixed strata. The results indicate that at low inclination angles, the deformation and v-shaped notches inside the hole are controlled by the structure plane. Progressive spalling failure occurs at the sidewalls along the structure plane in soft rock. But the transmission of the loading force between the soft rock and hard rock are different in local. At high inclination angles, v-shaped notches are approximately perpendicular to the structure plane, and the soft and hard rock bear common loads. Incompatible deformation between the soft rock and hard rock controls the failure process. At inclination angles of 0 degrees, 30 degrees and 90 degrees, incompatible deformations are closely related to rock damage. At 60 degrees, incompatible deformations and rock damage are discordant due that the soft rock and hard rock alternately bears the major loads during the failure process. The failure trend and modes of the numerical results agree very well with those observed in the experimental results. As the inclination angles increase, the proportion of the shear or tensile damage exhibits a nonlinear increase or decrease, suggesting that the inclination angle of mixed strata may promote shear damage and restrain tensile damage.
引用
收藏
页码:461 / 474
页数:14
相关论文
共 39 条
  • [1] Crack development in transversely isotropic sandstone discs subjected to Brazilian tests observed using digital image correlation
    Aliabadian, Zeinab
    Zhao, Gao-Feng
    Russell, Adrian R.
    [J]. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2019, 119 : 211 - 221
  • [2] Mechanical Properties and Failure Patterns of Migmatized Gneiss with Metamorphic Foliation Under UCS Test
    Bercakova, Andrea
    Melichar, Rostislav
    Soucek, Kamil
    [J]. ROCK MECHANICS AND ROCK ENGINEERING, 2020, 53 (04) : 2007 - 2013
  • [3] Mechanical properties of oil shale-coal composite samples
    Chen, Shaojie
    Yin, Dawei
    Jiang, Ning
    Wang, Feng
    Zhao, Zenghui
    [J]. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2019, 123
  • [4] Deformation failure characteristics of coal-rock combined body under uniaxial compression: experimental and numerical investigations
    Chen, Yulong
    Zuo, Jianping
    Liu, Dejun
    Wang, Zhenbo
    [J]. BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT, 2019, 78 (05) : 3449 - 3464
  • [5] A Case Study on the Asymmetric Deformation Characteristics and Mechanical Behavior of Deep-Buried Tunnel in Phyllite
    Chen, Ziquan
    He, Chuan
    Xu, Guowen
    Ma, Gaoyu
    Wu, Di
    [J]. ROCK MECHANICS AND ROCK ENGINEERING, 2019, 52 (11) : 4527 - 4545
  • [6] Uniaxial experimental study of the acoustic emission and deformation behavior of composite rock based on 3D digital image correlation (DIC)
    Cheng, Jian-Long
    Yang, Sheng-Qi
    Chen, Kui
    Ma, Dan
    Li, Feng-Yuan
    Wang, Li-Ming
    [J]. ACTA MECHANICA SINICA, 2017, 33 (06) : 999 - 1021
  • [7] Cheng JW, 2018, THESIS
  • [8] Numerical simulation on strata behaviours of TCCWF influenced by coal-rock combined body
    Cheng, Zhanbo
    Pan, Weidong
    Li, Xinyuan
    Sun, Wenbin
    [J]. GEOMECHANICS AND ENGINEERING, 2019, 19 (03) : 269 - 282
  • [9] Support working resistance determined on top-coal caving face based on coal-rock combined body
    Cheng, Zhanbo
    Yang, Shengli
    Li, Lianghui
    Zhang, Lingfei
    [J]. GEOMECHANICS AND ENGINEERING, 2019, 19 (03) : 255 - 268
  • [10] Deformation and strength anisotropy of Asan gneiss, Boryeong shale, and Yeoncheon schist
    Cho, Jung-Woo
    Kim, Hanna
    Jeon, Seokwon
    Min, Ki-Bok
    [J]. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2012, 50 : 158 - 169