Analysis of longitudinal weld seam defects and investigation of solid-state bonding criteria in porthole die extrusion process of aluminum alloy profiles

In porthole die extrusion process of aluminum alloy profiles, the formation of longitudinal weld seams (L-seams) is inevitable. Analysis of L-seam defects and investigation of solid-state bonding criteria are important issues for practical production. In this study, a set of modular porthole extrusion dies with different depths of welding chambers were designed and manufactured. The profiles extruded with different depths of welding chambers were obtained by performing extrusion experiments.The welding quality of extruded profiles was characterized by means of microstructure observation, tensile test and fracture analysis. The true stress-strain curves of homogenized AA6063 aluminum alloy with various strain rates and deformation temperatures were obtained by means of isothermal hot compression test. Three-dimensional transient numerical simulation models of the porthole die extrusion processes were established. Flow behaviors of aluminum alloy in porthole die extrusion process were investigated, and the formation processes of L-seams and their defects were revealed. The solid-state bonding processes of metal particles were traced and their welding paths were determined. Finally, based on the plastic deformation and diffusion mechanisms for closure behaviors of micro voids on contact interfaces, a new dimensionless solid-state bonding criterion related to stress triaxiality, effective strain rate, temperature and contact time was proposed. The bonding quality of L-seams of extruded profiles without any macro defect was predicted successfully by using this new criterion. In addition, it was found that the formation of a macro hole in the profile extruded with a shallow welding chamber is attributed to metal flow behavior, and does not relate to solid-state bonding process. (C) 2016 Elsevier B.V. All rights reserved.