Microstructural Characterization of a Ni-Al Alloyed Layer Prepared Using Laser Rapid Solidification

被引：0
|
作者：
Yang, Y. [1 ]
Hu, J-D. [2 ]
机构：
[1] Changchun Univ Technol, Coll Mat Sci & Engn, Changchun 130012, Peoples R China
[2] Jilin Univ, Coll Mat Sci & Engn, Minist Educ, Key Lab Automobile Mat, Changchun 130025, Peoples R China
来源：
LASERS IN ENGINEERING | 2010年 / 20卷 / 3-4期
关键词：
Nd:YAG laser; nickel-aluminium alloy; rapid solidification; solidification microstructure; solidification velocity; eutectic growth; P AMORPHOUS PHASES; ALUMINUM;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A Ni-P electroless deposited coating with crystalline morphology was prepared on an Al substrate using Nd:YAG pulsed laser. Various laser operating parameters were experimented with and a solidification microstructure was obtained at a laser power density of 5.36 x 10(9) W/m(2) and a scanning speed 3 mm/s. This solidified microstructure was characterized through its cross-section and showed a typical microstructure located in the upper part, the middle melted zone and the interface of meltpool with the Al substrate. The microstructure was further analysed by transmission electron microscopy (TEM). The actual solidification velocity was quantitatively determined by means of scanning electron microscopy (SEM). From the various means of observations the growth process of the Ni-Al eutectic phases was elucidated.
引用
收藏
页码：179 / 187
页数：9
相关论文
共 50 条
  • [1] Microstructural Characterization of Ni-Al Alloyed Layer under Laser Rapid Solidification Condition
    Yang, Yue
    Wu, Hua
    MECHATRONICS AND MATERIALS PROCESSING I, PTS 1-3, 2011, 328-330 : 565 - 568
  • [2] Microstructure and Microhardness of Tempered Ni-Al Alloyed Layer
    Yang, Yue
    Wu, Hua
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2012, 28 (10) : 937 - 940
  • [3] Microstructure and Microhardness of Tempered Ni-Al Alloyed Layer
    Yue Yang and Hua Wu College of Materials Science and Engineering
    Journal of Materials Science & Technology, 2012, 28 (10) : 937 - 940
  • [4] Laser Beam Rapid Solidification of Plasma Sprayed Ni-Al Coatings on Steel
    Akhtar, Shazeen
    Akhtar, Naveed
    Tauqir, Anjum
    PROCEEDINGS OF 2019 16TH INTERNATIONAL BHURBAN CONFERENCE ON APPLIED SCIENCES AND TECHNOLOGY (IBCAST), 2019, : 7 - 13
  • [5] Characterization of Ni-P Amorphous Phase Formation in an Ni-Al Alloyed Layer Produced Using a Pulsed Nd-YAG Laser Beam
    Yang, Y.
    Hu, J-D.
    LASERS IN ENGINEERING, 2014, 29 (3-4) : 189 - 195
  • [6] Effects of laser power density on the microstructure and microhardness of Ni-Al alloyed layer by pulsed laser irradiation
    Yang, Y.
    Hu, J. D.
    OPTICS AND LASER TECHNOLOGY, 2011, 43 (01): : 138 - 142
  • [7] Effect of Ni-P amorphous phases on the wear resistance of Ni-Al alloyed layer formed by pulsed laser irradiation
    Yang, Y.
    Hu, J. D.
    JOURNAL OF MATERIALS SCIENCE, 2008, 43 (08) : 2967 - 2969
  • [8] Effect of Ni-P Amorphous Phases on the Corrosion Resistance of a Ni-Al Alloyed Layer Formed by Pulsed Laser Irradiation
    Yang, Y.
    Hu, J-D
    LASERS IN ENGINEERING, 2013, 25 (3-4) : 225 - 232
  • [9] Microstructural characterization of nanostructured Al2O3-ZrO2 eutectic layer by laser rapid solidification method
    Wang, Zhi-Gang
    Ouyang, Jia-Hu
    Wang, Yu-Jin
    Xie, Ling-Yun
    Ma, Yong-Hui
    Liu, Zhan-Guo
    Henniche, Abdelkhalek
    Wang, Yang
    APPLIED SURFACE SCIENCE, 2019, 476 : 335 - 341
  • [10] Microstructure and mechanical properties of Ni-Al and Ni-Al-B alloys produced by rapid solidification technique
    Lima, MSF
    Ferreira, PI
    INTERMETALLICS, 1996, 4 (02) : 85 - 90
12345