An Extended Inertia and Eigenfrequency Emulation for Full-Scale Wind Turbine Nacelle Test Benches

被引:0
|
作者
Jassmann, Uwe [1 ,2 ]
Hakenberg, Mathias [1 ]
Abel, Dirk [1 ]
机构
[1] Rhein Westfal TH Aachen, Inst Automat Control, D-50256 Aachen, Germany
[2] Rhein Westfal TH Aachen, Ctr Wind Power Drives CWD, D-50256 Aachen, Germany
来源
2015 IEEE/ASME INTERNATIONAL CONFERENCE ON ADVANCED INTELLIGENT MECHATRONICS (AIM) | 2015年
关键词
D O I
暂无
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
The main causes of wind turbines failures are mechanical and electrical drive train components [1]. Since isolated simulation studies seem not to sufficiently reproduce load situations in the fully assembled and operated system, wind industry pays more and more attention to wind turbine System Test Benches. They allow for detailed load analysis within the complete drive train system and also for controller tests. For both investigations drive train dynamics of the wind turbine generator (WTG) are of high relevance. This dynamic behavior is mainly determined by the rotor's inertia which, due to its size, has to be dismounted for System Test Bench tests. By that, the dynamics of the remaining drive train change significantly. In order to still operate the WTG controller without modifying it and to allow for representative load analysis a Hardware-in-the-Loop (HiL) Controller needs to reproduce the realistic drive train behavior at the System Test Bench. This paper proposes a control concept which emulates the missing rotor related inertia as well as the drive train and the coupled rotor-drive train related eigenfrequencies which are both crucial for load analysis as well as controller tests. The proposed concept consists of a virtual spring-damper-system combined with a subsidiary state feedback controller. The controller synthesis is conducted using a quadratic norm. The simulation results show that the eigenfrequencies can be reproduced with less than 2% error. When time-discrete operation is considered, the results are slightly downgraded, so that alternative synthesis procedures need to be investigated in the future. The method proposed in this paper is based upon an experimentally verified inertia emulation method [2]. Furthermore the simulation models used throughout this simulation study are experimentally validated models of a 1MW System Test Bench [3] at the Center for Wind Power Drives of RWTH Aachen University.
引用
收藏
页码:996 / 1001
页数:6
相关论文
共 50 条
  • [1] Experimental Validation of Inertia-Eigenfrequency Emulation for Wind Turbines on System Test Benches
    Basler, Maximilian
    Leisten, Christian
    Jassmann, Uwe
    Abel, Dirk
    IECON 2020: THE 46TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2020, : 205 - 212
  • [2] Hardware-in-the-loop Drive Train Control for Realistic Emulation of Rotor Torque in a Full-scale Wind Turbine Nacelle Test Rig
    Neshati, Mohsen
    Zuga, Adam
    Jersch, Torben
    Wenske, Jan
    2016 EUROPEAN CONTROL CONFERENCE (ECC), 2016, : 1481 - 1486
  • [3] CHARACTERIZING THE INFLUENCE OF ABSTRACTION IN FULL-SCALE WIND TURBINE NACELLE TESTING
    Schkoda, Ryan
    Bibo, Amin
    Guo, Yi
    Lambert, Scott
    Wallen, Robb
    PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2016, VOL 8, 2016,
  • [4] Pitfalls of testing wind turbine control algorithms on nacelle test benches
    Klein, Andreas
    Basler, Maximilian
    Abel, Dirk
    FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH, 2023, 87 (01): : 83 - 91
  • [5] Model Based Active Damping of Drive Train Torsional Oscillations for a Full-scale Wind Turbine Nacelle Test Rig
    Neshati, Mohsen
    Jersch, Torben
    Wenske, Jan
    2016 AMERICAN CONTROL CONFERENCE (ACC), 2016, : 2283 - 2288
  • [6] Field test of an active flap system on a full-scale wind turbine
    Gonzalez, Alejandro Gomez
    Enevoldsen, Peder B.
    Barlas, Athanasios
    Madsen, Helge A.
    WIND ENERGY SCIENCE, 2021, 6 (01) : 33 - 43
  • [7] Design and Analysis of a MPC-based Mechanical Hardware-in-the-Loop System for Full-Scale Wind Turbine System Test Benches
    Leisten, Christian
    Jassmann, Uwe
    Balshuesemann, Johannes
    Hakenberg, Mathias
    Abel, Dirk
    IFAC PAPERSONLINE, 2017, 50 (01): : 10985 - 10991
  • [8] ON THE MULTI-BODY MODELING AND VALIDATION OF A FULL SCALE WIND TURBINE NACELLE TEST BENCH
    Panyam, Meghashyam
    Bibo, Amin
    Roach, Samuel
    PROCEEDINGS OF THE ASME 11TH ANNUAL DYNAMIC SYSTEMS AND CONTROL CONFERENCE, 2018, VOL 3, 2018,
  • [9] Improved resonance method for fatigue test of full-scale wind turbine blades
    Zhou, Aiguo
    Shi, Jinlei
    Ma, Yi
    Xu, Xiufeng
    AIP ADVANCES, 2022, 12 (08)
  • [10] Study on loading scheme for full-scale fatigue test of wind turbine blades
    An Z.
    Ma J.
    Ma Q.
    Zhang Y.
    Taiyangneng Xuebao/Acta Energiae Solaris Sinica, 2021, 42 (10): : 250 - 257