Design and Analysis of a Diode Magnetron Injection Gun for a G-Band Gyro-TWT

被引：9

作者：

Jiang, Wei ^{[1
]}

Liu, Yunpeng ^{[1
]}

Lu, Chaoxuan ^{[1
]}

Dai, Boxin ^{[1
]}

Wang, Jianxun ^{[1
]}

Pu, Youlei ^{[1
]}

Liu, Guo ^{[1
]}

Wu, Zewei ^{[1
]}

Luo, Yong ^{[1
]}

机构：

[1] Univ Elect Sci & Technol China, Sch Elect Sci & Engn, Chengdu 611731, Peoples R China

来源：

IEEE TRANSACTIONS ON ELECTRON DEVICES | 2022年 / 69卷 / 03期

关键词：

Magnetic tunneling; Cathodes; Magnetic circuits; Electron traps; Magnetic resonance imaging; Magnetic analysis; Thermal stability; G-band; gyro-traveling wave tube (Gyro-TWT); magnetron injection gun (MIG); thermal analysis; transportation stability; 1; MW; OPTIMIZATION; SIMULATION; ANODE; 2-MW; MIG;

D O I：

10.1109/TED.2022.3144649

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

A diode magnetron injection gun (MIG) has been designed and analyzed for G-band gyro-traveling wave tube (Gyro-TWT). A novel curved surface emitter is proposed to enhance the beam quality. An electron beam with velocity ratio of 1.20 and transverse velocity spread of 2.11% is obtained. The beam transportation stability with geometry misalignment is also analyzed, and the assembly accuracy should be controlled under 0.1 mm. The stray electron is intercepted by the capture structure to avoid the bombardment to the interaction circuit. Then the cathode is fabricated, and the temperature distribution is measured. The experimental result matches well with the simulation. The electron beam quality considering expansion, surface roughness, and thermal emission is estimated, and the total transverse velocity spread is about 2.63%.

引用

页码：1429 / 1434

页数：6

共 31 条

[1] MAGNETRON INJECTION GUN (MIG) DESIGN FOR GYROTRON APPLICATIONS
BAIRD, JM
LAWSON, W
[J]. INTERNATIONAL JOURNAL OF ELECTRONICS, 1986, 61 (06) : 953 - 967
[2] New trends of gyrotron development at KIT: An overview on recent investigations
Gantenbein, G.
Avramidis, K.
Illy, S.
Ioannidis, Z. C.
Jin, J.
Jelonnek, J.
Kalaria, P.
Pagonakis, I. Gr
Ruess, S.
Ruess, T.
Rzesnicki, T.
Thumm, M.
Wu, C.
[J]. FUSION ENGINEERING AND DESIGN, 2019, 146 : 341 - 344
[3] Gantenbein G., 2021, P 28 IAEA FUSION ENE, P1, DOI [10.1109/IVEC.2015.7223779, DOI 10.1109/IVEC.2015.7223779]
[4] Illy S, 2017, IEEE INT VAC ELECT C
[5] Development and Experimental Verification of an XY-Table for the Optimization of the Alignment of High-Power Gyrotrons
Ioannidis, Zisis C.
Avramidis, Konstantinos A.
Gantenbein, Gerd
Illy, Stefan
Kobarg, Thorsten
Pagonakis, Ioannis Gr.
Rzesnicki, Tomasz
Jelonnek, John
[J]. IEEE TRANSACTIONS ON ELECTRON DEVICES, 2019, 66 (04) : 1954 - 1959
[6] Thermal Analysis of Sheet Beam Gun for the Sheet Beam Traveling Wave Tube
Jiang, Wei
Wang, Jianxun
Luo, Yong
Xu, Lin
Yao, Xu
Wang, Shafei
[J]. IEEE TRANSACTIONS ON ELECTRON DEVICES, 2016, 63 (03) : 1312 - 1316
[7] Genetic Algorithm-Based Shape Optimization of Modulating Anode for Magnetron Injection Gun With Low Velocity Spread
Jiang, Wei
Luo, Yong
Yan, Ran
Wang, Shafei
[J]. IEEE TRANSACTIONS ON ELECTRON DEVICES, 2015, 62 (08) : 2657 - 2662
[8] Design of a Magnetron Injection Gun for a 670-GHz 300-kW Gyrotron
Kesar, Amit S.
Petillo, John J.
Nusinovich, Gregory S.
Herrmannsfeldt, William Bill
Granatstein, Victor L.
[J]. IEEE TRANSACTIONS ON PLASMA SCIENCE, 2011, 39 (12) : 3337 - 3344
[9] Triode Type Coaxial Inverse Magnetron Injection Gun for 2-MW, 240-GHz Gyrotron
Kumar, Nitin
Singh, Udaybir
Bera, Anirban
[J]. IEEE TRANSACTIONS ON ELECTRON DEVICES, 2019, 66 (07) : 3151 - 3156
[10] MAGNETRON INJECTION GUN SCALING
LAWSON, W
[J]. IEEE TRANSACTIONS ON PLASMA SCIENCE, 1988, 16 (02) : 290 - 295

← 1 2 3 4 →