Carbon periodic cellular architectures

被引：59

作者：

Szczurek, A. ^{[1
]}

Ortona, A. ^{[2
]}

Ferrari, L. ^{[2
]}

Rezaei, E. ^{[2
]}

Medjandi, G. ^{[1
]}

Fierro, V. ^{[1
]}

Bychanok, D. ^{[3
]}

Kuzhir, P. ^{[3
]}

Celzard, A. ^{[1
]}

机构：

[1] Univ Lorraine N 7198, CNRS, Inst Jean Lamour, UMR, F-88026 Epinal Cedex, France

[2] Univ Appl Sci SUPSI, ICIMSI Res Inst, Dept Technol & Innovat, CH-6928 Manno, Switzerland

[3] Belarusian State Univ, Res Inst Nucl Problems, Minsk 220030, BELARUS

来源：

CARBON | 2015年 / 88卷

关键词：

X-RAY-DIFFRACTION; CATALYTIC GRAPHITIZATION; POLYURETHANE FOAM; PHENOLIC RESIN; RAMAN-SPECTRA; PARTICLE-SIZE; TEMPERATURE; CARBONIZATION; MONOLITHS; CERAMICS;

D O I：

10.1016/j.carbon.2015.02.069

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

The first carbon periodic cellular architectures derived from 3D printing, in the form of new tetrakaidecahedra meshes, are reported and investigated in this paper. They were prepared in hydrothermal conditions by a template method based on polymer periodic structures of the same geometry, and fabricated by a 3D printer using photocurable resin. Several formulations based on resorcinol-formaldehyde were tested, and the best ones were those using low concentrations of resorcinol at 150 degrees C in a pressurised solution of nickel nitrate. After pyrolysis at 1000 degrees C, catalytic graphitisation was demonstrated by TEM, XRD and Raman studies. The higher was the amount of nickel, the higher was the resultant graphitisation level. Mechanical tests were also carried out on such extremely lightweight periodic carbon structures, showing that these new materials present a much higher modulus than carbon foams of similar bulk densities. (c) 2015 Elsevier Ltd. All rights reserved.

引用

页码：70 / 85

页数：16

共 63 条

[31] A low-temperature autoclaving route to synthesize monolithic carbon materials with an ordered mesostructure [J].

Liu, Lei ;

Wang, Feng-Yun ;

Shao, Gao-Song ;

Yuan, Zhong-Yong .

CARBON, 2010, 48 (07) :2089-2099

[32] Carbon foams prepared by an oil-in-water emulsion method [J].

Liu, Mingxian ;

Gan, Lihua ;

Zhao, Fengqi ;

Xu, Huixiang ;

Fan, Xuezhong ;

Tian, Ci ;

Wang, Xi ;

Xu, Zijie ;

Hao, Zhixian ;

Chen, Longwu .

CARBON, 2007, 45 (13) :2710-2712

[33] Novel methods to fabricate macroporous 3D carbon scaffolds and ordered surface mesopores on carbon filaments [J].

Lu, Xuesong ;

Chen, Lifeng ;

Amini, Negar ;

Yang, Shoufeng ;

Evans, Julian R. G. ;

Guo, Zheng Xiao .

JOURNAL OF POROUS MATERIALS, 2012, 19 (05) :529-536

[34]

Maire J., 1970, Chemistry and Physics of Carbon, V6, P125

[35]

Manocha SM, 2010, INDIAN J ENG MATER S, V17, P338

[36] CATALYTIC GRAPHITIZATION BY IRON OF ISOTROPIC CARBON FROM POLYFURFURYL ALCOHOL, 725-1090 K - A HIGH-RESOLUTION ELECTRON-MICROSCOPE STUDY [J].

MARSH, H ;

CRAWFORD, D ;

TAYLOR, DW .

CARBON, 1983, 21 (01) :81-87

[37] Strength scaling of brittle graphitic foam [J].

Mora, RJ ;

Waas, AM .

PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 2002, 458 (2023) :1695-1718

[38] Carbonisation of resorcinol-formaldehyde organic xerogels: Effect of temperature, particle size and heating rate on the porosity of carbon xerogels [J].

Moreno, A. H. ;

Arenillas, A. ;

Calvo, E. G. ;

Bermudez, J. M. ;

Menendez, J. A. .

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS, 2013, 100 :111-116

[39] Preparation of low density carbon foams by foaming molten sucrose using an aluminium nitrate blowing agent [J].

Narasimman, R. ;

Prabhakaran, K. .

CARBON, 2012, 50 (05) :1999-2009

[40]

Ortona Alberto, 2014, Advances in Science and Technology, V91, P70, DOI 10.4028/www.scientific.net/AST.91.70

← 1 2 3 4 5 6 7 →