EXPERIMENTAL INVESTIGATION OF DOUBLE SIDE FRICTION STIR WELDING (FSW) ON HIGH DENSITY POLYETHYLENE BLANKS

被引：0

作者：

Saeedy, S. ^{[1
]}

Givi, M. K. Besharati ^{[1
]}

机构：

[1] Univ Tehran, Dept Mech Engn, Fac Engn, Tehran, Iran

来源：

PROCEEDINGS OF THE ASME 10TH BIENNIAL CONFERENCE ON ENGINEERING SYSTEMS DESIGN AND ANALYSIS, 2010, VOL 4 | 2010年

关键词：

Friction stir welding; Polyethylene Blanks; Double side; TOOL;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The effect of double side technique in friction stir welding of polyethylene blanks has been studied. Experiments have been designed and analyzed with the full factorial method. The process parameters were rotation speed and tool tilt angle. The optimum welding condition has been determined. It has been demonstrated that double side FSW can improve the weld quality by decreasing the problem of stress concentration in the root of the joint. By applying this technique, 80% of the base material strength is achieved. Considerable reduction in elongation and toughness of the seam weld is due to crystallinity changes of the weld zone which are indicated in the DSC test results.

引用

页码：845 / 848

页数：4

共 10 条

[1] Antony Jiju, 2003, Design of Experiments for Engineers and Scientists, P54, DOI [10.1016/B978-075064709-0/50007-7, DOI 10.1016/B978-075064709-0/50007-7]
[2] Effects of double passes of the tool on friction stir welding of polyethylene
Arici, A
Sinmazcelik, T
[J]. JOURNAL OF MATERIALS SCIENCE, 2005, 40 (12) : 3313 - 3316
[3] BAHEMMAT P, 2009, P IMECHE B, DOI DOI 10.1243/09544054JEM1554
[4] On the thermo-mechanical loads and the resultant residual stresses in friction stir processing operations
Buffa, G.
Fratini, L.
Pasta, S.
Shivpuri, R.
[J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2008, 57 (01) : 287 - 290
[5] Mechanical and metallurgical effects of in process cooling during friction stir welding of AA7075-T6 butt joints
Fratini, L.
Buffa, G.
Shivpuri, R.
[J]. ACTA MATERIALIA, 2010, 58 (06) : 2056 - 2067
[6] The role of friction stir welding tool on material flow and weld formation
Kumar, K.
Kailas, Satish V.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 485 (1-2): : 367 - 374
[7] Seth R. Strand, 2004, THESIS BRIGHAM YOUNG
[8] VILACA P, 2006, ANN DUNAREA JOS U GA
[9] A fully coupled thermo-mechanical model of friction stir welding
Zhang, Z.
Zhang, H. W.
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2008, 37 (3-4) : 279 - 293
[10] ZHANGY H, 2007, J MAT SCI TECHNOL, V23

← 1 →