Optimizing and identifying the process parameters of AZ31 magnesium alloy in hot compression on the base of processing maps

被引：45

作者：

Shang, Xin ^{[1
]}

Zhou, Jie ^{[1
]}

Wang, Xun ^{[1
]}

Luo, Yan ^{[1
]}

机构：

[1] Chongqing Univ, Coll Mat Sci & Engn, Chongqing 400030, Peoples R China

来源：

JOURNAL OF ALLOYS AND COMPOUNDS | 2015年 / 629卷

关键词：

AZ31; Hot compression deformation; Process parameters; Processing map; Microstructure; DYNAMIC RECRYSTALLIZATION; MICROSTRUCTURE; EVOLUTION;

D O I：

10.1016/j.jallcom.2014.12.251

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

This paper conducted the compression tests at elevated temperatures to analyze the influence of process parameters on hot formability of AZ31. And the true stress-strain curves at different temperatures and strain rates were obtained. Three criterions including sensitive index of the strain rate (m-value), power dissipation factor (eta-value) and flow instability (n xi((epsilon)over dot)-value) were calculated according to them. Based on the criterions, hot processing maps of AZ31 were constructed. Then the deformation mechanism and instability mechanism were analyzed through investigating the microstructure of stable and instable regions. Finally, the optimum process parameters were obtained. As a result, some defects could be avoided in forming process to obtain consistent properties. (C) 2015 Elsevier B.V. All rights reserved.

引用

页码：155 / 161

页数：7

共 18 条

[1] Microstructure evolution in hot worked and annealed magnesium alloy AZ31 [J].

Beer, A. G. ;

Barnett, M. R. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 485 (1-2) :318-324

[2] Microstructure and texture development during hydrostatic extrusion of magnesium alloy AZ31 [J].

Bohlen, J ;

Yi, SB ;

Swiostek, J ;

Letzig, D ;

Brokmeier, HG ;

Kainer, KU .

SCRIPTA MATERIALIA, 2005, 53 (02) :259-264

[3] Characteristics of the contraction twins formed close to the fracture surface in Mg-3Al-1Zn alloy deformed in tension [J].

Cizek, P. ;

Barnett, M. R. .

SCRIPTA MATERIALIA, 2008, 59 (09) :959-962

[4] Influence of texture on the recrystallization mechanisms in an AZ31 Mg sheet alloy at dynamic rates [J].

Dudamell, N. V. ;

Ulacia, I. ;

Galvez, F. ;

Yi, S. ;

Bohlen, J. ;

Letzig, D. ;

Hurtado, I. ;

Perez-Prado, M. T. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 532 :528-535

[5] Experimental study on tensile property of AZ31B magnesium alloy at different high strain rates and temperatures [J].

Feng, Fei ;

Huang, Shangyu ;

Meng, Zhenghua ;

Hu, Jianhua ;

Lei, Yu ;

Zhou, Mengcheng ;

Wu, Dan ;

Yang, Zhenzhen .

MATERIALS & DESIGN, 2014, 57 :10-20

[6] Modeling texture evolution during rolling process of AZ31 magnesium alloy with elasto-plastic self consistent model [J].

Huang Shi-yao ;

Zhang Shao-rui ;

Li Da-yong ;

Peng Ying-hong .

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2011, 21 (06) :1348-1354

[7] Cavitation characteristics in AZ31 Mg alloys during LTSP or HSRSP [J].

Lee, CJ ;

Huang, JC .

ACTA MATERIALIA, 2004, 52 (10) :3111-3122

[8]

LIU L, 2004, ADV TECHNOL MAT MAT, V6, P155

[9] Mechanical characterization and constitutive modeling of Mg alloy sheets [J].

Mekonen, M. Nebebe ;

Steglich, D. ;

Bohlen, J. ;

Letzig, D. ;

Mosler, J. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 540 :174-186

[10] Modeling the initiation of dynamic recrystallization using a dynamic recovery model [J].

Momeni, A. ;

Dehghani, K. ;

Ebrahimi, G. R. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (39) :9387-9393

← 1 2 →