A SIMPLE METHOD FOR DETERMINING A THICKNESS OF METAL BASED ON LOCK-IN THERMOGRAPHY

被引:2
作者
Zrhaiba, A. [1 ]
Balouki, A. [1 ]
Elhassnaoui, A. [1 ]
Yadir, S. [3 ]
Halloua, H. [2 ]
Sahnoun, S. [2 ]
机构
[1] Fac Sci & Technol, Ind Engn Lab, BP 523, Beni Mellal, Morocco
[2] Fac Sci, Lab Elect Instrumentat & Energet, BP 20, El Jadida, Morocco
[3] Cadi Ayyad Univ, Lab Mat Proc Environm & Qual, Natl Sch Appl Sci, Safi, Morocco
关键词
Lock-in thermography; Fourier transform; galvanization; thermal response; phase angle;
D O I
10.1142/S0218625X1930003X
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
The use of coatings is an important tool in the industry. It allows protecting against oxidation, corrosion and various types of fatigue. The coating thickness is an important characteristic that influences the quality and the performance of materials. In this paper, we develop a simple method of infrared lock-in thermography (LIT) to determine galvanizing coating thickness measurement, by using a sample multiple zinc layer with thickness ranging from 0.25 mm to 1.5 mm. The method has the particularity of taking a sinusoidal excitation heat flux which contributes with a heat exchange coefficient fixed at 10 w/m(2)k and a surface emissivity of about 0.1. The finite element method (FEM) is used to model and analyze the thermal response of studied structure. The metal substrate used in this study is a structural steel, covered with six zinc layers. The finite elements analysis allows us to determine the temperature evolution at different points on the specimen. The Fourier transform method is used on the Matlab software to determine the phase angle of the data found. A correlation between the coating thickness and the equivalent phase angle is defined, and the results deduced show that the estimated values are close to the actual coating thicknesses with a precision ranging from 0.029 mm to 0.011 mm.
引用
收藏
页数:5
相关论文
共 10 条
  • [1] [Anonymous], 2010, LOCKIN THERMOGRAPHY
  • [2] Holman J. P., 2011, J MATER CHEM, V21, P5011
  • [3] Ibarra-Castanedo C, 2004, Quantitative Infrared No Change Mark as Done Save and Next 100% ORS Done Thermography Journal, V1, P47, DOI 10.3166/qirt.1.47-70
  • [4] Karaoglanli A. C., 2017, STATE ART THERMAL BA, P441
  • [5] Li Changqin, 2005, NONDESTRUCT TEST, V27, P454
  • [6] Research on thermal wave processing of lock-in thermography based on analyzing image sequences for NDT
    Liu Junyan
    Wang Yang
    Dai Jingmin
    [J]. INFRARED PHYSICS & TECHNOLOGY, 2010, 53 (05) : 348 - 357
  • [7] Modelling of the lock-in thermography process through finite element method for estimating the rail squat defects
    Peng, D.
    Jones, R.
    [J]. ENGINEERING FAILURE ANALYSIS, 2013, 28 : 275 - 288
  • [8] Artificial disbonds for calibration of transient thermography inspection of thermal barrier coating systems
    Ptaszek, Grzegorz
    Cawley, Peter
    Almond, Darryl
    Pickering, Simon
    [J]. NDT & E INTERNATIONAL, 2012, 45 (01) : 71 - 78
  • [9] Xing-wang G. U. O., 2010, ACTA AERONAUT ASTRON, V31, P198
  • [10] A new measurement method of coatings thickness based on lock-in thermography
    Zhang, Jin-Yu
    Meng, Xiang-bin
    Ma, Yong-chao
    [J]. INFRARED PHYSICS & TECHNOLOGY, 2016, 76 : 655 - 660