Growth of c-axis oriented aluminum nitride films on GaAs substrates by reactive rf magnetron sputtering

被引:22
作者
Cheng, CC [1 ]
Chen, YC
Horng, RC
Wang, HJ
Chen, WR
Lai, EK
机构
[1] Sze Hai Inst Technol & Commerce, Dept Elect Engn, Taipei 23618, Taiwan
[2] Natl Sun Yat Sen Univ, Dept Elect Engn, Kaohsiung 80424, Taiwan
来源
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS | 1998年 / 16卷 / 06期
关键词
D O I
10.1116/1.581541
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
c-axis oriented aluminum nitride (AlN) films deposited on GaAs substrates by reactive rf magnetron sputtering were fabricated. The structural and morphological characterizations were found to be sensitive to the deposition conditions including rf power, Nz concentration, sputtering pressure and substrate temperature. A highly c-axis oriented AIN him was. identified as low as 350 degrees C by x-ray diffraction. The crystallization of the AlN film with (002) preferred orientation tended to improve with increased rf power and N-2 concentration within the experimental range. A densely pebble-like surface texture of the c-axis oriented ALN films with an average grain size of about 80 nm was observed by scanning electron microscopy (SEM). The film showed a high degree of alignment of the columnar structure as was indicated by the cross-sectional SEM photograph. The selected area diffraction pattern showed that the deposited films exhibited a polycrystalline microstructure. (C) 1998 American Vacuum Society. [S0734-2101(98)04006-8].
引用
收藏
页码:3335 / 3340
页数:6
相关论文
共 50 条
  • [31] Growth and Morphological Evolution of c-axis Oriented AlN Films on Si (100) Substrates by DC Sputtering Technique
    Pandey, Akhilesh
    Prakash, Ravi
    Dutta, Shankar
    Dalal, Sandeep
    Kumar, Anand
    Kapoor, Ashok K.
    Kaur, Davinder
    2ND INTERNATIONAL CONFERENCE ON CONDENSED MATTER AND APPLIED PHYSICS (ICC-2017), 2018, 1953
  • [32] Microstructural evolution and formation of highly c-axis-oriented aluminum nitride films by reactively magnetron sputtering deposition
    Liu, WJ
    Wu, SJ
    Chen, CM
    Lai, YC
    Chuang, CH
    JOURNAL OF CRYSTAL GROWTH, 2005, 276 (3-4) : 525 - 533
  • [33] Enhancement of the c-axis texture of aluminum nitride by an inductively coupled plasma reactive sputtering process
    Yeh, CM
    Chen, CH
    Gan, JY
    Kou, CS
    Hwang, J
    THIN SOLID FILMS, 2005, 483 (1-2) : 6 - 9
  • [34] Low temperature growth of c-axis oriented AlN films on γ-LiAlO2 by radio frequency magnetron sputtering
    Teng, Hao
    Zhou, Shengming
    Lin, Hui
    Huang, Taohua
    Han, Ping
    Zhang, Rong
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 469 (1-2) : 219 - 223
  • [35] Deposition of c-axis oriented AlN films by rf magnetron spluttering for surface acoustic wave
    Cheng, CC
    Kao, KS
    Chen, YC
    SMART MATERIALS, 2001, 4234 : 328 - 337
  • [36] Pulsed laser deposition of c-axis oriented aluminum nitride thin films on silicon
    Tabbal, M
    Mérel, P
    Chaker, M
    Pépin, H
    EUROPEAN PHYSICAL JOURNAL-APPLIED PHYSICS, 2001, 14 (02) : 115 - 119
  • [37] Multipath-induced c-axis orientation of aluminum nitride films deposited using direct-current magnetron sputtering
    Zhu, Huanneng
    Wu, Jin
    Yang, Zhenhuai
    Guo, Kesheng
    Liu, Jing
    Liu, Lei
    Zhang, Chuandong
    Bai, Jie
    Liu, Hong
    Xiao, Yongneng
    Hu, Lang
    Hu, Qiang
    Wang, Qiang
    MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, 2025, 189
  • [38] Carbon nitride thin films prepared by reactive rf magnetron sputtering
    Logothetidis, S
    Lefakis, H
    Gioti, M
    FULLERENES AND CARBON BASED MATERIALS, 1998, 68 : 757 - 760
  • [39] Low temperature growth of c-axis oriented AlN films on γ-LiAlO2 by radio frequency magnetron sputtering
    Teng, Hao
    Zhou, Shengming
    Lin, Hui
    Huang, Taohua
    Han, Ping
    Zhang, Rong
    Journal of Alloys and Compounds, 2009, 469 (1-2): : 219 - 223
  • [40] Deposition of molybdenum nitride thin films by rf reactive magnetron sputtering
    Anitha, VP
    Major, S
    Chandrashekharam, D
    Bhatnagar, M
    SURFACE & COATINGS TECHNOLOGY, 1996, 79 (1-3) : 50 - 54