NUMERICAL ESTIMATION OF THE ONE-DIMENSIONAL CONSOLIDATION BEHAVIOR OF CLAY

被引:2
作者
Uysal, Firdevs [1 ]
Sivrikaya, Osman [2 ]
机构
[1] Nigde Omer Halisdemir Univ, Dept Civil Engn, TR-51240 Nigde, Turkey
[2] Karadeniz Tech Univ, Dept Civil Engn, TR-61080 Trabzon, Turkey
来源
ACTA GEOTECHNICA SLOVENICA | 2020年 / 17卷 / 02期
关键词
one-dimensional consolidation test; clay; excess pore-water pressure; deformation; side friction; numerical analysis;
D O I
10.18690/actageotechslov.17.2.16-25.2020
中图分类号
P5 [地质学];
学科分类号
0709 ; 081803 ;
摘要
The consolidation behavior of clayey soils is traditionally evaluated in the laboratory using the one-dimensional consolidometer test. A new oedometer cell design with a ring of 60 mm in height, 75 mm in diameter was made to measure the excess pore-water pressure at the undrained base of the specimen and the friction between the soil and the ring, and to determine the epsilon - log p curve. This study deals with numerical modeling of the one-dimensional consolidation test and comparing the data obtained from the experimental study with the data from the modeling. In the modeling, the Soft Soil and Soft Soil Creep models were used for the clay proposed in this study. The results show, as a general trend, that the data from the numerical modeling are compatible with those from the experimental study.
引用
收藏
页码:16 / 25
页数:10
相关论文
共 53 条
[1]  
[Anonymous], 2003, ANN BOOK ASTM STAND, V03.01
[2]  
[Anonymous], 1990, 1377 BS
[3]  
BARDEN L, 1968, GEOTECHNIQUE, V18, P1
[4]   OEDOMETER TEST WITH DIFFERENT SPECIMEN HEIGHTS ON A CLAY EXHIBITING LARGE SECONDARY COMPRESSION [J].
BERRE, T ;
IVERSEN, K .
GEOTECHNIQUE, 1972, 22 (01) :53-&
[5]   ENGINEERING GEOLOGY OF NORWEGIAN NORMALLY-CONSOLIDATED MARINE CLAYS AS RELATED TO SETTLEMENTS OF BUILDINGS [J].
BJERRUM, L .
GEOTECHNIQUE, 1967, 17 (02) :83-&
[6]  
Brumund W.F., 1976, 163 TRANSP RES BOARD, P4
[7]   LOCAL STRAINS AND PORE PRESSURES IN A NORMALLY CONSOLIDATED CLAY LAYER DURING ONE-DIMENSIONAL CONSOLIDATION [J].
BURLAND, JB ;
ROSCOE, KH .
GEOTECHNIQUE, 1969, 19 (03) :335-&
[8]  
Burmister D.M., 1960, ASTM STP, P88
[9]  
Carlstedt E., 2008, THESIS TRITA BKN