Laser straightness interferometer system with rotational error compensation and simultaneous measurement of six degrees of freedom error parameters

被引:44
作者
Chen, Benyong [1 ]
Xu, Bin [1 ]
Yan, Liping [1 ]
Zhang, Enzheng [1 ]
Liu, Yanna [1 ]
机构
[1] Zhejiang Sci Tech Univ, Nanometer Measurement Lab, Hangzhou 310018, Zhejiang, Peoples R China
来源
OPTICS EXPRESS | 2015年 / 23卷 / 07期
基金
中国国家自然科学基金;
关键词
MACHINE-TOOLS; MULTI-DEGREE; NONLINEARITY; ACCURACY;
D O I
10.1364/OE.23.009052
中图分类号
O43 [光学];
学科分类号
070207 ; 0803 ;
摘要
A laser straightness interferometer system with rotational error compensation and simultaneous measurement of six degrees of freedom error parameters is proposed. The optical configuration of the proposed system is designed and the mathematic model for simultaneously measuring six degrees of freedom parameters of the measured object including three rotational parameters of the yaw, pitch and roll errors and three linear parameters of the horizontal straightness error, vertical straightness error and straightness error's position is established. To address the influence of the rotational errors produced by the measuring reflector in laser straightness interferometer, the compensation method of the straightness error and its position is presented. An experimental setup was constructed and a series of experiments including separate comparison measurement of every parameter, compensation of straightness error and its position and simultaneous measurement of six degrees of freedom parameters of a precision linear stage were performed to demonstrate the feasibility of the proposed system. Experimental results show that the measurement data of the multiple degrees of freedom parameters obtained from the proposed system are in accordance with those obtained from the compared instruments and the presented compensation method can achieve good effect in eliminating the influence of rotational errors on the measurement of straightness error and its position. (C) 2015 Optical Society of America
引用
收藏
页码:9052 / 9073
页数:22
相关论文
共 26 条
[1]  
[Anonymous], THESIS U N CAROLINA
[2]   Performance evaluation of a new taut wire system for straightness measurement of machine tools [J].
Borisov, Oleg ;
Fletcher, Simon ;
Longstaff, Andrew ;
Myers, Alan .
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2014, 38 (03) :492-498
[3]   A laser interferometer for measuring straightness and its position based on heterodyne interferometry [J].
Chen, Benyong ;
Zhang, Enzheng ;
Yah, Liping ;
Li, Chaorong ;
Tang, Wuhua ;
Feng, Qibo .
REVIEW OF SCIENTIFIC INSTRUMENTS, 2009, 80 (11)
[4]   Straightness/coaxiality measurement system with transverse Zeeman dual-frequency laser [J].
Chen, QH ;
Lin, DJ ;
Wu, J ;
Yan, JQ ;
Yin, CY .
MEASUREMENT SCIENCE AND TECHNOLOGY, 2005, 16 (10) :2030-2037
[5]   A laser straightness measurement system using optical fiber and modulation techniques [J].
Fan, KC ;
Zhao, Y .
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2000, 40 (14) :2073-2081
[6]   A 6-degree-of-freedom measurement system for the accuracy of X-Y stages [J].
Fan, KC ;
Chen, MJ .
PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 2000, 24 (01) :15-23
[7]   Development of a simple system for simultaneously measuring 6DOF geometric motion errors of a linear guide [J].
Feng Qibo ;
Zhang Bin ;
Cui Cunxing ;
Kuang Cuifang ;
Zhai Yusheng ;
You Fenglin .
OPTICS EXPRESS, 2013, 21 (22) :25805-25819
[8]   Optical parts and the nonlinearity in heterodyne interferometers [J].
Hou, Wenmei .
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2006, 30 (03) :337-346
[9]   Developed of a Multi-Degree of Freedoms Measuring System and an error compensation technique for machine tools [J].
Jywe, Wen-Yuh ;
Liu, Chien-Hung ;
Shien, W. H. ;
Shyu, Lih-Horng ;
Fang, Te-Hua ;
Sheu, Yung-Hoh ;
Hsu, Tung-Hui ;
Hsieh, Chi-Chen .
4th International Symposium on Instrumentation Science and Technology (ISIST' 2006), 2006, 48 :761-765
[10]   Position and out-of-straightness measurement of a precision linear air-bearing stage by using a two-degree-of-freedom linear encoder [J].
Kimura, Akihide ;
Gao, Wei ;
Zeng Lijiang .
MEASUREMENT SCIENCE AND TECHNOLOGY, 2010, 21 (05)