Improvement of Porosity of Strip Using a Scraper on the Casting by a Vertical Type High Speed Roll Caster

被引：2

作者：

Haga, Toshio ^{[1
]}

Shiotsu, Yusuke ^{[1
]}

Komeda, Kosuke ^{[1
]}

Kumai, Shinji ^{[2
]}

Warari, Hisaki ^{[3
]}

机构：

[1] Osaka Inst Technol, 5-16-1 Omiya Asahiku, Osaka 5358585, Japan

[2] Tokyo Inst Technol, Yokohama, Kanagawa 2268502, Japan

[3] Gunma Univ, Kiryu, Gunma 3768515, Japan

来源：

ADVANCES IN SUPERALLOYS, PTS 1 AND 2 | 2011年 / 146-147卷

关键词：

Twin roll caster; Strip Casting; roll casting; Porosity; Al-Mg alloy;

D O I：

10.4028/www.scientific.net/AMR.146-147.1108

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Porosity occurred in the 5182 aluminum alloy strip cast by a vertical type high speed twin roll caster. The porosity was caused by high-roll-speed and low-roll-load. Improvement of the porosity was tried by a scraper. The scraper was mounted on the roll, and the scraper was moveable depend on the thickness of the solidified layer on the roll. The scraper scribed the semisolid layer to improve the porosity. The scraper was useful to decrease the porosity of roll cast 5182 aluminum alloy strip.

引用

页码：1108 / +

页数：2

共 50 条

[1] Strip casting using a roll caster equipped with a scraper
Haga, Toshio
17TH INTERNATIONAL CONFERENCE ON ALUMINIUM ALLOYS 2020 (ICAA17), 2020, 326
[2] Investigation of the influence of the roll surface on the cast strip at the casting using a vertical type high speed twin roll caster
Yamashiki, T.
Haga, T.
Kumai, S.
Watari, H.
FRONTIERS OF MECHANICAL ENGINEERING AND MATERIALS ENGINEERING, PTS 1 AND 2, 2012, 184-185 : 271 - +
[3] Strip Casting by a Single Roll Caster Equipped with a Scraper
Haga, Toshio
Akitsu, Kazuya
Yamabayashir, Takanori
Kumai, Shinji
Watari, Hisaki
ADVANCES IN MATERIALS PROCESSING IX, 2010, 443 : 122 - +
[4] Semisolid strip casting using a vertical type twin roll caster
Haga, T
Takahashi, K
Watari, H
THERMEC'2003, PTS 1-5, 2003, 426-4 : 477 - 482
[5] Casting Process at Roll Bite in Strip Cast Using Vertical-Type High-Speed Twin-Roll Caster
Haga, Toshio
Kurahashi, Yukihiro
METALS, 2022, 12 (07)
[6] A vertical type tandem twin roll caster for clad strip equipped with a scraper
Haga, Toshio
Tsuge, Hiroshi
Ishihara, Takuya
Kumai, Shinji
Watari, Hisaki
MATERIAL FORMING ESAFORM 2014, 2014, 611-612 : 623 - 628
[7] Roll Casting of Aluminum Alloy Strip by a Single Roll Caster Equipped with a Scraper
Haga, Toshio
Akitsu, Kazuya
Kumai, Shinji
Watari, Hisaki
MATERIALS AND MANUFACTURING TECHNOLOGIES XIV, 2012, 445 : 307 - +
[8] High-speed roll caster for strip casting of aluminum alloy
Haga, T
Suzuki, S
ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, 2000, 331-3 : 185 - 190
[9] High-speed roll caster for strip casting of aluminum alloy
Haga, Toshio
Suzuki, Shinsuke
Materials Science Forum, 2000, 331 (I) : 185 - 190
[10] Casting of aluminum alloy strip by a single-roll caster equipped with a scraper
Akitsu, Kazuya
Kamakura, Keisuke
Haga, Toshio
Kumai, Shinji
Watari, Hisaki
Keikinzoku/Journal of Japan Institute of Light Metals, 2012, 62 (04): : 146 - 152

← 1 2 3 4 5 →