Uncertainty evaluation of the Unified Method for thermo-electric module characterization

被引：10
作者：
D'Aucelli, G. M. [1 ]
Giaquinto, N. [1 ]
Carducci, C. Guarnieri Calo [2 ]
Spadavecchia, M. [1 ]
Trotta, A. [1 ]
机构：
[1] Polytech Univ Bari, Bari, Italy
[2] Rhein Westfal TH Aachen, Aachen, Germany
来源：
MEASUREMENT | 2019年 / 131卷
关键词：
Thermoelectric devices; Estimation; Monte Carlo methods; Measurement uncertainty; Sensitivity analysis; POWER-GENERATION; WIRELESS SENSOR; EFFICIENCY; GUM;
D O I：
10.1016/j.measurement.2018.08.070
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this paper the uncertainty evaluation of the recently proposed Unified Method for Thermo-Electric Module characterization is carried out. The measurement model is detailed and individual uncertainty contributions are highlighted, with close reference to the instrumentation and measurement setup. The uncertainty evaluation is performed by means of a Monte Carlo Simulation. The same algorithm is used to perform a sensitivity analysis, giving a comprehensive insight into the most critical issues of the proposed method and assessing the performance of the two adopted electrical stimuli. The experimental results thereby obtained are discussed and improvements to the measurement setup and technique are finally proposed. (C) 2018 Elsevier Ltd. All rights reserved.
引用
收藏
页码：751 / 763
页数：13
相关论文
共 50 条
[21]   Uncertainty Evaluation in the Measurements for the Electric Power Quality Analysis [J].
Cipriani, Giovanni ;
Miceli, Rosario ;
Spataro, Ciro .
2013 INTERNATIONAL CONFERENCE ON RENEWABLE ENERGY RESEARCH AND APPLICATIONS (ICRERA), 2013, :1151-1156
[22]   Validation of the sensitivity analysis method of coordinate measurement uncertainty evaluation [J].
Wojtyla, Miroslaw ;
Rosner, Pawel ;
Plowucha, Wojciech ;
Forbes, Alistair B. ;
Savio, Enrico ;
Balsamo, Alessandro .
MEASUREMENT, 2022, 199
[23]   Analysis of discharge performance and thermo-electric conversion efficiency in thermally regenerative ammonia-based flow battery with foam copper electrode [J].
Yang, Jiebo ;
Yu, Qinghua ;
Chen, Sheng ;
Yan, Fuwu ;
Yu, Yang .
ENERGY CONVERSION AND MANAGEMENT, 2024, 311
[24]   A Method of Determining an Electric Energy Meter Maximum Uncertainty [J].
Mroz, Piotr ;
Olencki, Andrzej ;
Bukowiec, Arkadiusz .
MULTIMEDIA AND UBIQUITOUS ENGINEERING, 2014, 308 :405-410
[25]   Getting started with uncertainty evaluation using the Monte Carlo method in R [J].
van der Veen, Adriaan M. H. ;
Cox, Maurice G. .
ACCREDITATION AND QUALITY ASSURANCE, 2021, 26 (03) :129-141
[26]   Getting started with uncertainty evaluation using the Monte Carlo method in R [J].
Adriaan M. H. van der Veen ;
Maurice G. Cox .
Accreditation and Quality Assurance, 2021, 26 :129-141
[27]   Evaluation of measurement uncertainty and its numerical calculation by a Monte Carlo method [J].
Wuebbeler, Gerd ;
Krystek, Michael ;
Elster, Clemens .
MEASUREMENT SCIENCE AND TECHNOLOGY, 2008, 19 (08)
[28]   Multi-objective optimization to enhance the performance of thermo-electric generator combined with heat pipe-heat sink under forced convection [J].
Elghool, Ali ;
Basrawi, Firdaus ;
Ibrahim, Thamir Khalil ;
Ibrahim, Hassan ;
Ishak, M. ;
bin Yusof, Mohd Hazwan ;
Bagaber, Salem Abdullah .
ENERGY, 2020, 208
[29]   Enhancing the performance of a thermo-electric generator through multi-objective optimisation of heat pipes-heat sink under natural convection [J].
Elghool, Ali ;
Basrawi, Firdaus ;
Ibrahim, Hassan ;
Ibrahim, Thamir Khalil ;
Ishak, M. ;
Yusof, T. M. ;
Bagaber, Salem Abdullah .
ENERGY CONVERSION AND MANAGEMENT, 2020, 209
[30]   THE CHOICE OF METHOD TO THE EVALUATION OF MEASUREMENT UNCERTAINTY IN METROLOGY [J].
Sousa, J. Alves ;
Ribeiro, A. Silva .
XIX IMEKO WORLD CONGRESS: FUNDAMENTAL AND APPLIED METROLOGY, PROCEEDINGS, 2009, :2388-2393
12345