Energy aspects and workpiece surface characteristics in ultrasonic-assisted cylindrical grinding of alumina-zirconia ceramics

Ultrasonic assisted grinding is a novel method for improving the grinding process of difficult-to-cut materials. In the present research a novel setup has been designed and manufactured for utilizing ultrasonic vibrations in external cylindrical grinding. The designed ultrasonic head vibrates a rotating workpiece in axial direction. An alumina-zirconia ceramic (AZ90) has been selected as the workpiece material. Energy aspects and workpiece surface characteristics of ultrasonic assisted cylindrical grinding (UACG) and conventional cylindrical grinding (CG) processes have been analytically modeled and corresponding grinding experiments have been performed. The combined kinematics of the cylindrical plunge grinding process and axial ultrasonic vibrations provide a unique surface treatment conditions, which leads to reduced peak heights and increased valley depths of the surface topography. The main axial vibration mode provides the overlap of the adjacent cutting traces and consequently smoothens the surface topography in cylindrical plunge grinding. It has been analytically and experimentally shown that, applying ultrasonic vibrations, grinding energy can be reduced up to more than 35% depending on the process parameters. The surface characteristics of the ground workpieces have been investigated in terms of four surface roughness parameters and the roundness error. (C) 2014 Elsevier Ltd. All rights reserved.