Notch effect in high cycle fatigue

被引：0
|
作者：
Pluvinage, G
机构：
来源：
ADVANCES IN FRACTURE RESEARCH, VOLS 1-6 | 1997年
关键词：
notch effect; fatigue initiation;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The notch effect in fatigue can be interpreted in terms of local criterion assuming that the stress range is higher than an effective value in the process zone characterized by the effective distance. These parameters can be established on the notch tip stress distribution and are connected with the notch stress inensity factor range. This approach allows to get by computing the fatigue stress concentration factor and the notch sensitivity index.
引用
收藏
页码：1239 / 1250
页数：12
相关论文
共 50 条
  • [31] Notch effect in tension-tension fatigue of short glass fibre reinforced polyphenylene sulfide composites
    Coppola, Filippo
    Ricotta, Mauro
    Bonato, Nicolo
    Carmignato, Simone
    Meneghetti, Giovanni
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2024, 131
  • [32] Quantitative relationship between weld defect characteristic and fatigue crack initiation life for high-cycle fatigue property
    Shao, Chendong
    Cui, Haichao
    Lu, Fenggui
    Li, Zhuguo
    INTERNATIONAL JOURNAL OF FATIGUE, 2019, 123 : 238 - 247
  • [33] Fatigue strength assessment of load-carrying cruciform joints in low- and high-cycle fatigue region based on effective notch strain conceptHENRY GRANJON PRIZE 2013 Winner Category C: Design and Structural Integrity
    Kawin Saiprasertkit
    Welding in the World, 2014, 58 : 455 - 467
  • [34] Prediction of fatigue limit reliability of high strength steel with deep notch under mean stress σ m=0
    Miyazaki, Tatsujiro
    Noguchi, Hiroshi
    Kage, Masaharu
    INTERNATIONAL JOURNAL OF FRACTURE, 2011, 168 (01) : 73 - 91
  • [35] Prediction of fatigue limit reliability of high strength steel with deep notch under mean stress σm = 0
    Tatsujiro Miyazaki
    Hiroshi Noguchi
    Masaharu Kage
    International Journal of Fracture, 2011, 168 : 73 - 91
  • [36] Formation of fine grained area in martensitic steel during very high cycle fatigue
    Chai, G.
    Forsman, T.
    Gustavsson, F.
    Wang, C.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2015, 38 (11) : 1315 - 1323
  • [37] Study on the high cycle fatigue properties of in-situ TiB2/7050 composite
    Duan M.
    Li C.
    Li B.
    Li Y.
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2023, 40 (11): : 6430 - 6438
  • [38] Modeling the high-cycle fatigue crack initiation in short fiber reinforced polymers with notches
    Pietrogrande, Riccardo
    Carraro, Paolo Andrea
    Zappalorto, Michele
    De Monte, Matthias
    Quaresimin, Marino
    POLYMER COMPOSITES, 2024, 45 (09) : 8037 - 8049
  • [39] On the notch sensitivity of as-built Laser Beam Powder Bed-Fused AlSi10Mg specimens subjected to Very High Cycle Fatigue tests at ultrasonic frequency up to 109 cycles
    Tridello, Andrea
    Niutta, Carlo Boursier
    Benelli, Alessandro
    Pagnoncelli, Ana Paula
    Rossetto, Massimo
    Berto, Filippo
    Paolino, Davide Salvatore
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2024, 47 (11) : 4356 - 4371
  • [40] Short fatigue crack growth from a blunt notch in plate specimens
    Zhang, Hui
    Fatemi, Ali
    INTERNATIONAL JOURNAL OF FRACTURE, 2011, 170 (01) : 1 - 11
12345