Tensile deformation behavior of a sub-micrometer Al2O3/6061Al composite

被引：22

作者：

Zhang, Qiang ^{[1
]}

Wu, Gaohui ^{[1
]}

Jiang, Longtao ^{[1
]}

机构：

[1] Harbin Inst Technol, Sch Mat Sci & Engn, Harbin 150001, Peoples R China

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2008年 / 483-84卷 / 281-284期

关键词：

Al2O3; particles; aluminum-matrix composite; tensile property; deformation; crack;

D O I：

10.1016/j.msea.2006.09.143

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

A 0.3 mu m Al2O3/6061Al composite with 33% volume fraction of Al2O3 was fabricated by the patented squeeze-casting technology. The tensile properties were studied, and the dynamic tensile deformation behavior was investigated by an in situ TEM tensile technique. The as-cast composite exhibits excellent tensile properties with a fracture strength of 504 MPa, and the strength increases to 579 MPa after a T6 treatment. The high strength is mainly attributed to the dispersion strengthening effect of the finer sub-micrometer Al2O3 particles. Dynamic transmission electron microscopy indicates that micro-cracks initiate and propagate mainly in the matrix. The Al2O3 particles can hinder the growth and deflect the cracks, but the resistance of the particles to crack propagation is small. The propagation stage is accordingly short, leading to the fracture of the composite. (C) 2007 Elsevier B.V. All rights reserved.

引用

页码：281 / 284

页数：4

共 12 条

[1]

CLEGG WJ, 1988, ACTA MAT, V34, P1251

[2] DYNAMIC STUDIES OF THE CRACK INITIATION AND GROWTH MECHANISMS IN AL/SICP COMPOSITES [J].

DOONG, SH ;

LEE, TC ;

ROBERTSON, IM ;

BIRNBAUM, HK .

SCRIPTA METALLURGICA, 1989, 23 (08) :1413-1418

[3]

EHSANI R, 2004, SCI IRAN, V11, P392

[4] EFFECT OF PARTICLE-SIZE ON FRACTURE-TOUGHNESS OF SIC/AL COMPOSITE-MATERIAL [J].

FLOM, Y ;

ARSENAULT, RJ .

ACTA METALLURGICA, 1989, 37 (09) :2413-2423

[5] Microstructure and mechanical behavior of sub-micro particulate-reinforced Al matrix composites [J].

Jiang, LT ;

Wu, GH ;

Sun, DL ;

Zhang, Q ;

Chen, JF ;

Kouno, N .

JOURNAL OF MATERIALS SCIENCE LETTERS, 2002, 21 (08) :609-611

[6] MICROMECHANICAL FRACTURE PROCESS OF SIC-PARTICLE-REINFORCED ALUMINUM-ALLOY 6061-T6 METAL MATRIX COMPOSITES [J].

KIM, HJ ;

KOBAYASHI, T ;

YOON, HS .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1992, 154 (01) :35-41

[7] DYNAMIC OBSERVATION OF FAILURE PROCESSES IN AL/SIC COMPOSITE-MATERIALS [J].

LEE, CS ;

KIM, YH ;

LIM, T ;

HAN, KS .

SCRIPTA METALLURGICA ET MATERIALIA, 1991, 25 (03) :613-618

[8]

LLOYD DJ, 1994, INT MATER REV, V39, P1, DOI 10.1179/095066094790150982

[9]

Luan BF, 2003, T NONFERR METAL SOC, V13, P148

[10] Micro-yield property of sub-micron Al2O3 particle reinforced 2024 aluminum matrix composite [J].

Wang, XF ;

Wu, GH ;

Sun, DL ;

Qin, CJ ;

Tian, YL .

MATERIALS LETTERS, 2004, 58 (3-4) :333-336

← 1 2 →