Micro Wire Electro Discharge Grinding: Optimization of Material Removal Rate and Surface Roughness

被引：1
|
作者：
Ali, Mohammad Yeakub [1 ]
Abd Rahman, Mohamed [1 ]
Nordin, Rosmarina [1 ]
机构：
[1] Int Islamic Univ Malaysia, Dept Mfg & Mat Engn, POB 10, Kuala Lumpur 50728, Malaysia
来源：
3RD INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND AEROSPACE ENGINEERING 2016 | 2017年 / 184卷
关键词：
D O I：
10.1088/1757-899X/184/1/012032
中图分类号：
V [航空、航天];
学科分类号：
08 ; 0825 ;
摘要：
This paper presents the analysis and modelling of material removal rate (MRR) and surface roughness (Ra) by micro wire electro discharge grinding (micro-WEDG) with control parameter of gap voltage, feed rate, and spindle speed. The data were analyzed and empirical models are developed. The optimized values of MRR and Ra are 0.051 mm3/min and 0.25 m respectively with 110 V gap voltage, 38 mu m/s feed rate, and 1315 rpm spindle speed. The analysis showed that gap voltage has significant effect on material removal rate while spindle speed has significant effect on surface roughness.u
引用
收藏
页数：7
相关论文
共 50 条
  • [21] EVALUATION OF MATERIAL REMOVAL RATE AND SURFACE ROUGHNESS IN WIRE ELECTRO-DISCHARGE MACHINING OF 10-WT.% ZrO2-REINFORCED AL ALLOY COMPOSITE
    Karthikeyan, A.
    Alagarsamy, S., V
    Perumal, C. Ilaiya
    SURFACE REVIEW AND LETTERS, 2022, 29 (01)
  • [22] Statistical modelling and analysis of material removal rate and surface roughness during wire electrical discharge hybrid turning (WEDHT) process
    M Vignesh
    R Ramanujam
    Sādhanā, 2021, 46
  • [23] Statistical modelling and analysis of material removal rate and surface roughness during wire electrical discharge hybrid turning (WEDHT) process
    Vignesh, M.
    Ramanujam, R.
    SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2021, 46 (02):
  • [24] The effect of ultrasound in micro electro discharge machining on surface roughness
    Yeo, SH
    Goh, KM
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2001, 215 (02) : 271 - 276
  • [25] An investigation of surface roughness and parametric optimization during wire electric discharge machining of cladded material
    Ishfaq, Kashif
    Mufti, Nadeem Ahmad
    Ahmed, Naveed
    Mughal, Mohammad Pervez
    Saleem, Muhammad Qaiser
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 97 (9-12): : 4065 - 4079
  • [26] An investigation of surface roughness and parametric optimization during wire electric discharge machining of cladded material
    Kashif Ishfaq
    Nadeem Ahmad Mufti
    Naveed Ahmed
    Mohammad Pervez Mughal
    Muhammad Qaiser Saleem
    The International Journal of Advanced Manufacturing Technology, 2018, 97 : 4065 - 4079
  • [27] Powder Mixed Micro Electro Discharge Milling of Titanium Alloy: Investigation of Material Removal Rate
    Ali, Mohammad Yeakub
    Rahman, Nur Atiqah Binti Abdul
    Aris, Erniyati Binti Mohamad
    MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-8, 2012, 383-390 : 1759 - 1763
  • [28] Modeling of material removal rate in electric discharge grinding process
    Satyarthi, M. K.
    Pandey, Pulak M.
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2013, 74 : 65 - 73
  • [29] Performance Measurement and Data Analysis of Material Removal Rate for Wire Cut Electro Discharge Machining Process
    Rehman, A.
    Bhagoria, J. L.
    MECHANICAL AND AEROSPACE ENGINEERING, PTS 1-7, 2012, 110-116 : 1683 - 1690
  • [30] Experimental Investigation of Surface Roughness and Material Removal Rate in Wire EDM of Stainless Steel 304
    Naeim, Noha
    AbouEleaz, Mona A.
    Elkaseer, Ahmed
    MATERIALS, 2023, 16 (03)
12345