Micro Wire Electro Discharge Grinding: Optimization of Material Removal Rate and Surface Roughness

被引：1
|
作者：
Ali, Mohammad Yeakub [1 ]
Abd Rahman, Mohamed [1 ]
Nordin, Rosmarina [1 ]
机构：
[1] Int Islamic Univ Malaysia, Dept Mfg & Mat Engn, POB 10, Kuala Lumpur 50728, Malaysia
来源：
3RD INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND AEROSPACE ENGINEERING 2016 | 2017年 / 184卷
关键词：
D O I：
10.1088/1757-899X/184/1/012032
中图分类号：
V [航空、航天];
学科分类号：
08 ; 0825 ;
摘要：
This paper presents the analysis and modelling of material removal rate (MRR) and surface roughness (Ra) by micro wire electro discharge grinding (micro-WEDG) with control parameter of gap voltage, feed rate, and spindle speed. The data were analyzed and empirical models are developed. The optimized values of MRR and Ra are 0.051 mm3/min and 0.25 m respectively with 110 V gap voltage, 38 mu m/s feed rate, and 1315 rpm spindle speed. The analysis showed that gap voltage has significant effect on material removal rate while spindle speed has significant effect on surface roughness.u
引用
收藏
页数：7
相关论文
共 50 条
  • [1] Optimization of material removal rate in wire electric discharge grinding for micro machining of tungsten electrodes
    Parthiban, M.
    Krishnaraj, V.
    Kanchana, J.
    Babu, M. Kantha
    INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2018, 25 (04) : 307 - 314
  • [2] Multi-objective optimization of material removal rate and surface roughness in wire electrical discharge turning
    S. Aravind Krishnan
    G. L. Samuel
    The International Journal of Advanced Manufacturing Technology, 2013, 67 : 2021 - 2032
  • [3] Multi-objective optimization of material removal rate and surface roughness in wire electrical discharge turning
    Krishnan, S. Aravind
    Samuel, G. L.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 67 (9-12): : 2021 - 2032
  • [4] Modeling of Material Removal Rate and Surface Roughness Generated during Electro-Discharge Machining
    Razeghiyadaki, Amin
    Molardi, Carlo
    Talamona, Didier
    Perveen, Asma
    MACHINES, 2019, 7 (02)
  • [5] Development of surface roughness optimisation and prediction for the process of wire electro-discharge grinding
    Rees, A.
    Brousseau, E.
    Dimov, S. S.
    Bigot, S.
    Griffiths, C. A.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 64 (9-12): : 1395 - 1410
  • [6] Development of surface roughness optimisation and prediction for the process of wire electro-discharge grinding
    A. Rees
    E. Brousseau
    S. S. Dimov
    S. Bigot
    C. A. Griffiths
    The International Journal of Advanced Manufacturing Technology, 2013, 64 : 1395 - 1410
  • [7] Surface roughness and material removal rate analyses of hard copper alloy in wire electrical discharge machining
    Evran, Savas
    EMERGING MATERIALS RESEARCH, 2020, 9 (03) : 730 - 737
  • [8] Investigation on the effects of ultrasonic vibration on material removal rate and surface roughness in wire electrical discharge turning
    Aminollah Mohammadi
    Alireza Fadaei Tehrani
    Amir Abdullah
    The International Journal of Advanced Manufacturing Technology, 2014, 70 : 1235 - 1246
  • [9] Material Removal Rate, Kerf, and Surface Roughness of Tungsten Carbide Machined with Wire Electrical Discharge Machining
    Shah, Aqueel
    Mufti, Nadeem A.
    Rakwal, Dinesh
    Bamberg, Eberhard
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2011, 20 (01) : 71 - 76
  • [10] Investigation on the effects of ultrasonic vibration on material removal rate and surface roughness in wire electrical discharge turning
    Mohammadi, Aminollah
    Tehrani, Alireza Fadaei
    Abdullah, Amir
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014, 70 (5-8): : 1235 - 1246
12345