The effect of strain path reversal on high-angle boundary formation by grain subdivision in a model austenitic steel

被引：37
|
作者：
Sun, L. [1 ]
Muszka, K. [1 ]
Wynne, B. P. [1 ]
Palmiere, E. J. [1 ]
机构：
[1] Univ Sheffield, Inst Microstruct & Mech Proc Engn, Sheffield S1 3JD, S Yorkshire, England
来源：
SCRIPTA MATERIALIA | 2011年 / 64卷 / 03期
基金：
英国工程与自然科学研究理事会;
关键词：
Austenite; Dislocation boundaries; Hot working; Strain path; Electron backscattering diffraction (EBSD); INTERSTITIAL-FREE STEEL; ULTRAFINE FERRITE; HOT TORSION; FCC METALS; INDUCED PRECIPITATION; ALUMINUM; RECRYSTALLIZATION; DEFORMATION; ORIENTATION; MICROSTRUCTURE;
D O I：
10.1016/j.scriptamat.2010.10.004
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The effects of large strain and strain path reversal on deformation microstructure development in austenite below recrystallization temperature were studied by hot torsion using an Fe-30 wt% Ni model alloy. Results show that high-angle boundaries (HABs) can be generated by both dislocation accumulation and subgrain rotation. Multiple strain reversals lead to less well-developed HABs in the original grains compared to single reversal deformed to the same strain. This is attributed to subgrain rotation mechanism being less effective at small strains. (C) 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：280 / 283
页数：4
相关论文
共 50 条
  • [31] Effect of the frequency of high-angle grain boundaries on the corrosion performance of 5wt%Cr steel in a CO2 aqueous environment
    Hui-bin Wu
    Tao Wu
    Gang Niu
    Tao Li
    Rui-yan Sun
    Yang Gu
    InternationalJournalofMineralsMetallurgyandMaterials, 2018, 25 (03) : 315 - 324
  • [32] The effect of strain path reversal during austenite deformation on phase transformation in a microalloyed steel subjected to accelerated cooling
    Sun, L.
    Muszka, K.
    Wynne, B. P.
    Palmiere, E. J.
    RECRYSTALLIZATION AND GRAIN GROWTH IV, 2012, 715-716 : 667 - 672
  • [33] Effect of the frequency of high-angle grain boundaries on the corrosion performance of 5wt%Cr steel in a CO2 aqueous environment
    Hui-bin Wu
    Tao Wu
    Gang Niu
    Tao Li
    Rui-yan Sun
    Yang Gu
    International Journal of Minerals, Metallurgy, and Materials, 2018, 25 : 315 - 324
  • [34] Effect of the frequency of high-angle grain boundaries on the corrosion performance of 5wt%Cr steel in a CO2 aqueous environment
    Wu, Hui-bin
    Wu, Tao
    Niu, Gang
    Li, Tao
    Sun, Rui-yan
    Gu, Yang
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2018, 25 (03) : 315 - 324
  • [35] Effect of a high angle grain boundary on deformation behavior of Al nanopillars
    Kim, Youbin
    Lee, Subin
    Jeon, Jong Bae
    Kim, Yong-Jae
    Lee, Byeong-Joo
    Oh, Sang Ho
    Han, Seung Min
    SCRIPTA MATERIALIA, 2015, 107 : 5 - 9
  • [36] Effect of strain-induced precipitation on the low angle grain boundary in AA7050 aluminum alloy
    Lang, Yujing
    Cai, Yuanhua
    Cui, Hua
    Zhang, Jishan
    MATERIALS & DESIGN, 2011, 32 (8-9) : 4241 - 4246
  • [37] GRAIN BOUNDARY CHARACTER DISTRIBUTION AND MECHANICAL PROPERTY OF THE AS COLD ROLLED HIGH NITROGEN AUSTENITIC STAINLESS STEEL
    Yan, Wei
    Shan, Yiyin
    Yang, Ke
    Wang, Wei
    TMS 2010 139TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 3: GENERAL PAPER SELECTIONS, 2010, : 665 - 672
  • [38] Formation of nano martensite grain with specific angle grain boundary during the drawing process of 316L stainless steel
    Li, Qiang
    Zhou, Lichu
    Pan, Yijie
    Ma, Jinfeng
    Zhou, Xuefeng
    Jiang, Hongbin
    Xie, Zonghan
    Fang, Feng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 897
  • [39] The effect of hydrogen alloying on strain hardening and fracture of a high-nitrogen austenitic steel
    Astafurova, E. G.
    Moskvina, V. A.
    Galchenko, N. K.
    Melnikov, E. V.
    Maier, G. G.
    Burlachenko, A. G.
    Astafurov, S. V.
    Zakharov, G. N.
    LETTERS ON MATERIALS-PIS MA O MATERIALAKH, 2018, 8 (01): : 71 - 76
  • [40] A correlation between grain boundary character and deformation twin nucleation mechanism in coarse-grained high-Mn austenitic steel
    Hung, Chang-Yu
    Bai, Yu
    Shimokawa, Tomotsugu
    Tsuji, Nobuhiro
    Murayama, Mitsuhiro
    SCIENTIFIC REPORTS, 2021, 11 (01)
12345