The effect of strain path reversal on high-angle boundary formation by grain subdivision in a model austenitic steel

被引：37
|
作者：
Sun, L. [1 ]
Muszka, K. [1 ]
Wynne, B. P. [1 ]
Palmiere, E. J. [1 ]
机构：
[1] Univ Sheffield, Inst Microstruct & Mech Proc Engn, Sheffield S1 3JD, S Yorkshire, England
来源：
SCRIPTA MATERIALIA | 2011年 / 64卷 / 03期
基金：
英国工程与自然科学研究理事会;
关键词：
Austenite; Dislocation boundaries; Hot working; Strain path; Electron backscattering diffraction (EBSD); INTERSTITIAL-FREE STEEL; ULTRAFINE FERRITE; HOT TORSION; FCC METALS; INDUCED PRECIPITATION; ALUMINUM; RECRYSTALLIZATION; DEFORMATION; ORIENTATION; MICROSTRUCTURE;
D O I：
10.1016/j.scriptamat.2010.10.004
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The effects of large strain and strain path reversal on deformation microstructure development in austenite below recrystallization temperature were studied by hot torsion using an Fe-30 wt% Ni model alloy. Results show that high-angle boundaries (HABs) can be generated by both dislocation accumulation and subgrain rotation. Multiple strain reversals lead to less well-developed HABs in the original grains compared to single reversal deformed to the same strain. This is attributed to subgrain rotation mechanism being less effective at small strains. (C) 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：280 / 283
页数：4
相关论文
共 50 条
  • [21] Grain boundary assembles developed in an austenitic stainless steel during large strain warm working
    Tikhonova, M.
    Kaibyshev, R.
    Fang, X.
    Wang, W.
    Belyakov, A.
    MATERIALS CHARACTERIZATION, 2012, 70 : 14 - 20
  • [22] The synergistic effect of grain boundary and grain orientation on micro-mechanical properties of austenitic stainless steel
    Hu, C. Y.
    Wan, X. L.
    Zhang, Y. J.
    Deng, X. T.
    Wang, Z. D.
    Misra, R. D. K.
    JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2021, 118
  • [23] Effect of post-GBE strain-sensitisation on corrosion resistance of grain boundary engineered 304 austenitic stainless steel
    Yamada, Gouki
    Kokawa, Hiroyuki
    Yasuda, Yu
    Tokita, Shun
    Yokoyama, Takashi
    Sato, Yutaka S.
    Fujii, Hiromichi T.
    Tsurekawa, Sadahiro
    PHILOSOPHICAL MAGAZINE, 2013, 93 (10-12) : 1443 - 1453
  • [24] Influence of grain boundary carbides on mechanical properties of high nitrogen austenitic stainless steel
    Wang, L. J.
    Sheng, L. Y.
    Hong, C. M.
    MATERIALS & DESIGN, 2012, 37 : 349 - 355
  • [25] Effects of Deformation Mode and Strain Level on Grain Boundary Character Distribution of 304 Austenitic Stainless Steel
    Feng, Wen
    Yang, Sen
    Yan, Yinbiao
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2018, 49A (06): : 2257 - 2268
  • [26] Dislocation emission from a cylindrical circular void separating two disclination dipoles in a high-angle grain boundary
    Colin, Jerome
    ACTA MECHANICA, 2019, 230 (08) : 2645 - 2654
  • [27] Orientations of recrystallization nuclei developed in columnar-grained Ni at triple junctions and a high-angle grain boundary
    Wu, G. L.
    Jensen, D. Juul
    ACTA MATERIALIA, 2007, 55 (15) : 4955 - 4964
  • [28] Effects of severe-strain-induced defects on the mechanical response of two kinds of high-angle grain boundaries
    Neier, Lisa
    Padmanabhan, K. A.
    Divinski, Sergiy
    Wilde, Gerhard
    PHILOSOPHICAL MAGAZINE, 2020, 100 (18) : 2365 - 2385
  • [29] On the formation and growth of grain boundary κ-carbides in austenitic high-Mn lightweight steels
    Elkot, Mohamed N.
    Sun, Binhan
    Zhou, Xuyang
    Ponge, Dirk
    Raabe, Dierk
    MATERIALS RESEARCH LETTERS, 2024, 12 (01): : 10 - 16
  • [30] A Two-Step Thermomechanical Process for Improving High-Angle Grain Boundary Proportion and Achieving Delamination Toughening in Hot-Rolled Steel with a Limited Slab-to-Plate Ratio
    Wang, Hongtao
    Tian, Yong
    Ye, Qibin
    Kan, Liye
    Wang, Zhaodong
    Wang, Guodong
    STEEL RESEARCH INTERNATIONAL, 2022, 93 (10)
12345