The effect of strain path reversal on high-angle boundary formation by grain subdivision in a model austenitic steel

被引：37
|
作者：
Sun, L. [1 ]
Muszka, K. [1 ]
Wynne, B. P. [1 ]
Palmiere, E. J. [1 ]
机构：
[1] Univ Sheffield, Inst Microstruct & Mech Proc Engn, Sheffield S1 3JD, S Yorkshire, England
来源：
SCRIPTA MATERIALIA | 2011年 / 64卷 / 03期
基金：
英国工程与自然科学研究理事会;
关键词：
Austenite; Dislocation boundaries; Hot working; Strain path; Electron backscattering diffraction (EBSD); INTERSTITIAL-FREE STEEL; ULTRAFINE FERRITE; HOT TORSION; FCC METALS; INDUCED PRECIPITATION; ALUMINUM; RECRYSTALLIZATION; DEFORMATION; ORIENTATION; MICROSTRUCTURE;
D O I：
10.1016/j.scriptamat.2010.10.004
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The effects of large strain and strain path reversal on deformation microstructure development in austenite below recrystallization temperature were studied by hot torsion using an Fe-30 wt% Ni model alloy. Results show that high-angle boundaries (HABs) can be generated by both dislocation accumulation and subgrain rotation. Multiple strain reversals lead to less well-developed HABs in the original grains compared to single reversal deformed to the same strain. This is attributed to subgrain rotation mechanism being less effective at small strains. (C) 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：280 / 283
页数：4
相关论文
共 50 条
  • [1] Dynamic recrystallization initiated by direct grain reorientation at high-angle grain boundary in -titanium
    Wang, Hao
    Bao, Qili L.
    Zhou, Gang
    Qiu, J. K.
    Yang, Yi
    Ma, Y. J.
    Bai, Chunguang G.
    Xu, Dongsheng S.
    Rugg, David
    Huang, Aijun J.
    Hu, Qing-Miao
    Lei, J. F.
    Yang, Rui
    JOURNAL OF MATERIALS RESEARCH, 2019, 34 (09) : 1608 - 1621
  • [2] Effect of the strain reversal on grain boundary character and substructure development on a hot worked austenitic stainless steel
    Jorge-Badiola, D
    Iza-Mendia, A
    Gutiérrez, I
    ICOTOM 14: TEXTURES OF MATERIALS, PTS 1AND 2, 2005, 495-497 : 1031 - 1036
  • [3] High angle boundary formation by grain subdivision in equal channel angular extrusion
    Sun, PL
    Kao, PW
    Chang, CP
    SCRIPTA MATERIALIA, 2004, 51 (06) : 565 - 570
  • [4] The effect of strain path reversal during hot rolling on austenitic stainless steel
    Higginson, RL
    Sellars, SM
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 338 (1-2): : 323 - 330
  • [5] Effect of Strain Path Reversal on Austenite Grain Subdivision and Deformation Induced Ferrite Transformation Studied by Hot Torsion
    Lin, Sun
    Krzysztof, Muszka
    Bradley, Wynne P.
    Eric, Palmiere J.
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2011, 18 : 233 - 237
  • [6] Effect of Strain Path Reversal on Austenite Grain Subdivision and Deformation Induced Ferrite Transformation Studied by Hot Torsion
    Muszka Krzysztof
    Wynne Bradley P
    Palmiere Eric J
    Journal of Iron and Steel Research(International), 2011, 18 (S1) : 233 - 237
  • [7] Effect of misorientation angle and chromium concentration on grain boundary sensitisation in an austenitic stainless steel
    Jiang, S.
    Hewett, J.
    Jones, I. P.
    Connolly, B. J.
    Chiu, Y. L.
    MATERIALS CHARACTERIZATION, 2020, 164
  • [8] Formation mechanism and application potential of Σ1 boundary in grain boundary engineering of high nitrogen austenitic stainless steel
    Wang, Zhenhua
    Liu, Yi
    MATERIALS LETTERS, 2019, 253 : 377 - 380
  • [9] Effects of initial grain size and strain on grain boundary engineering of high-nitrogen CrMn austenitic stainless steel
    Wang, Zhen-hua
    Qi, Jian-jun
    Fu, Wan-tang
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2018, 25 (08) : 922 - 929
  • [10] Effect of partial recrystallization on the grain size and grain boundary structure of austenitic steel
    Szabo, Peter J.
    MATERIALS CHARACTERIZATION, 2012, 66 : 99 - 103
12345