Mechanical properties of SiC/SiC composite with magnesium-silicon oxide interphase

被引:16
作者
Igawa, N. [1 ]
Taguchi, T. [1 ]
Yamada, R. [1 ]
Ishii, Y. [1 ]
Jitsukawa, S. [1 ]
机构
[1] Japan Atom Energy Agcy, Tokai, Ibaraki 3191195, Japan
关键词
D O I
10.1016/j.jnucmat.2007.03.091
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A SiC fiber reinforced SiC composite with magnesium-silicon-based oxide interphase was fabricated by the chemical vapor infiltration process and its mechanical properties were evaluated. An interphase was prepared on the advanced SiC fiber, Tyranno SA, using the alkoxide method. The tensile strengths of SiC fiber with the Mg-Si-O coating retained at 85% or higher compared to uncoated-un heated fiber after heating below the 1300 degrees C, while strength were slightly degraded to 80% after heating at 1400 degrees C. The composite showed ductile failure behavior and the fiber pull-out effect was observed in the fracture surface of the composite. (c) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码:725 / 729
页数:5
相关论文
共 18 条
[1]   Current status of SiC/SiC composites R&D [J].
Fenici, P ;
Rebelo, AJF ;
Jones, RH ;
Kohyama, A ;
Snead, LL .
JOURNAL OF NUCLEAR MATERIALS, 1998, 258 :215-225
[2]   Critical issues and current status of SiC/SiC composites for fusion [J].
Hasegawa, A ;
Kohyama, A ;
Jones, RH ;
Snead, LL ;
Riccardi, B ;
Fenici, P .
JOURNAL OF NUCLEAR MATERIALS, 2000, 283 (PART I) :128-137
[3]   Optimizing the fabrication process for superior mechanical properties in the FCVISiC matrix/stoichiometric SiC fiber composite system [J].
Igawa, N ;
Taguchi, T ;
Snead, LL ;
Katoh, Y ;
Jitsukawa, S ;
Kohyama, A ;
McLaughlin, JC .
JOURNAL OF NUCLEAR MATERIALS, 2002, 307 (2 SUPPL.) :1205-1209
[4]  
IGAWA N, 2000, CERAM ENG SCI P B, V21, P237
[5]  
Igawa N, 2005, CERAM ENG SCI PROC, V26, P27
[6]   High-strength alkali-resistant sintered SiC fibre stable to 2,200 °C [J].
Ishikawa, T ;
Kohtoku, Y ;
Kumagawa, K ;
Yamamura, T ;
Nagasawa, T .
NATURE, 1998, 391 (6669) :773-775
[7]   Promise and challenges of SiCf/SiC composites for fusion energy applications [J].
Jones, RH ;
Giancarli, L ;
Hasegawa, A ;
Katoh, Y ;
Kohyama, A ;
Riccardi, B ;
Snead, LL ;
Weber, WJ .
JOURNAL OF NUCLEAR MATERIALS, 2002, 307 (2 SUPPL.) :1057-1072
[8]   Mechanical properties of chemically vapor-infiltrated silicon carbide structural composites with thin carbon interphases for fusion and advanced fission applications [J].
Katoh, Y ;
Snead, LL ;
Nozawa, T ;
Hinoki, T ;
Kohyama, A ;
Igawa, N ;
Taguchi, T .
MATERIALS TRANSACTIONS, 2005, 46 (03) :527-535
[9]   Progress in SiC-based ceramic composites for fusion applications [J].
Katoh, Y ;
Kohyama, A ;
Hinoki, T ;
Snead, LL .
FUSION SCIENCE AND TECHNOLOGY, 2003, 44 (01) :155-162
[10]  
Lee WY, 1998, J AM CERAM SOC, V81, P717, DOI 10.1111/j.1151-2916.1998.tb02396.x