Evaluation of empirical estimation of uniaxial compressive strength of rock using measurements from index and physical tests

被引:62
作者
Aladejare, Adeyemi Emman [1 ]
机构
[1] Univ Oulu, Oulu Min Sch, Pentti Kaiteran Katu 1, Oulu 90014, Finland
关键词
Uniaxial compressive strength (UCS); Empirical equation; Index test; Physical test; Uniaxial compression test; Statistical analysis; POINT-LOAD STRENGTH; ARTIFICIAL NEURAL-NETWORK; ENGINEERING PROPERTIES; ELASTIC-MODULUS; DEFORMATION MODULUS; REGRESSION-MODEL; YOUNGS MODULUS; SCHMIDT HAMMER; FUZZY MODEL; PREDICTION;
D O I
10.1016/j.jrmge.2019.08.001
中图分类号
P5 [地质学];
学科分类号
0709 ; 081803 ;
摘要
The uniaxial compressive strength (UCS) of rock is an important parameter required for design and analysis of rock structures, and rock mass classification. Uniaxial compression test is the direct method to obtain the UCS values. However, these tests are generally tedious, time-consuming, expensive, and sometimes impossible to perform due to difficult rock conditions. Therefore, several empirical equations have been developed to estimate the UCS from results of index and physical tests of rock. Nevertheless, numerous empirical models available in the literature often make it difficult for mining engineers to decide which empirical equation provides the most reliable estimate of UCS. This study evaluates estimation of UCS of rocks from several empirical equations. The study uses data of point load strength (Is(50)), Schmidt rebound hardness (SRH), block punch index (BPI), effective porosity (n) and density (rho) as inputs to empirically estimate the UCS. The estimated UCS values from empirical equations are compared with experimentally obtained or measured UCS values, using statistical analyses. It shows that the reliability of UCS estimated from empirical equations depends on the quality of data used to develop the equations, type of input data used in the equations, and the quality of input data from index or physical tests. The results show that the point load strength (Is(50)) is the most reliable index for estimating UCS among the five types of tests evaluated. Because of type-specific nature of rock, restricting the use of empirical equations to the similar rock types for which they are developed is one of the measures to ensure satisfactory prediction performance of empirical equations. (C) 2020 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
引用
收藏
页码:256 / 268
页数:13
相关论文
共 94 条
[1]   Effect of Rock Properties on Excavation-Loading Operation in Selected Quarries [J].
Adebayo, B. ;
Aladejare, A. E. .
ADVANCES IN MATERIALS AND SYSTEMS TECHNOLOGIES IV, 2013, 824 :86-90
[2]  
Agustawijaya D.S., 2007, CIV ENG DIMENS, V9, P9, DOI [DOI 10.9744/CED.9.1, DOI 10.9744/CED.9]
[3]   The porosity and engineering properties of vesicular basalt in Saudi Arabia [J].
Al-Harthi, AA ;
Al-Amri, RM ;
Shehata, WM .
ENGINEERING GEOLOGY, 1999, 54 (3-4) :313-320
[4]   Design and Sensitivity Analysis of Rock Slope Using Monte Carlo Simulation [J].
Aladejare, Adeyemi Emman ;
Akeju, Victor Oluwatosin .
GEOTECHNICAL AND GEOLOGICAL ENGINEERING, 2020, 38 (01) :573-585
[5]   Probabilistic Characterization of Hoek-Brown Constant mi of Rock Using Hoek's Guideline Chart, Regression Model and Uniaxial Compression Test [J].
Aladejare, Adeyemi Emman ;
Wang, Yu .
GEOTECHNICAL AND GEOLOGICAL ENGINEERING, 2019, 37 (06) :5045-5060
[6]   Estimation of rock mass deformation modulus using indirect information from multiple sources [J].
Aladejare, Adeyemi Emman ;
Wang, Yu .
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY, 2019, 85 :76-83
[7]   Influence of rock property correlation on reliability analysis of rock slope stability: From property characterization to reliability analysis [J].
Aladejare, Adeyemi Emman ;
Wang, Yu .
GEOSCIENCE FRONTIERS, 2018, 9 (06) :1639-1648
[8]  
Aladejare AE, 2017, GEORISK, V11, P22, DOI 10.1080/17499518.2016.1207784
[9]   Assessing the uniaxial compressive strength of extremely hard cryptocrystalline flint [J].
Aliyu, M. M. ;
Shang, J. ;
Murphy, W. ;
Lawrence, J. A. ;
Collier, R. ;
Kong, F. ;
Zhao, Z. .
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2019, 113 :310-321
[10]  
[Anonymous], 1989, ENG ROCK MASS CLASSI