Time-dependent thermoelastic creep analysis of rotating disk made of Al-SiC composite

Time-dependent creep stress redistribution analysis of rotating disk made of Al-SiC composite is investigated using Mendelson's method of successive elastic solution. All mechanical and thermal properties except Poisson's ratio are radial dependent based on volume fraction percent of SiC reinforcement. The material creep behavior is described by Sherby's constitutive model using Pandey's experimental results on Al-SiC composite. Loading is an inertia body force due to rotation and a distributed temperature field due to steady-state heat conduction from inner to outer surface of the disk. Using equations of equilibrium, stress strain, and strain displacement, a differential equation, containing creep strains, for displacement is obtained. History of stresses and deformations are calculated using method of successive elastic solution. It is concluded that the uniform distribution of SiC reinforcement does not considerably influence on stresses. However, the minimum and most uniform distribution of circumferential and effective thermoelastic stresses belongs to composite disk of aluminum with 0% SiC at inner surface and 40% SiC at outer surface. It has also been found that the stresses, displacement, and creep strains are changing with time at a decreasing rate so that after almost 50 years the solution approaches the steady-state condition.