Processing of high strength EN AW 6082 forgings without a solution heat treatment

被引：36

作者：

Birol, Yucel ^{[1
]}

Gokcil, Emre ^{[2
]}

Guvenc, Mehmet Ali ^{[2
]}

Akdi, Seracettin ^{[2
]}

机构：

[1] Dokuz Eylul Univ, Dept Met & Mat Engn, Izmir, Turkey

[2] R&D Ctr, AYD Steering & Suspens Parts, Selcuklu, Konya, Turkey

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2016年 / 674卷

关键词：

Aluminium alloys; Hardness measurement; Mechanical characterization; Light microscopy; Thermomechanical processing; Age hardening; MG-SI ALLOYS; DISPERSOID CONTENT; GRAIN-STRUCTURE; EXTRUDED STOCK; AL-ALLOYS; CAST;

D O I：

10.1016/j.msea.2016.07.062

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Light weight EN AW 6082 alloy forgings are used extensively in automotive suspension components. The conventional production cycle involves a solution heat treatment that is responsible not only for coarse surface grains, potentially degrading for fatigue properties, but also for microstructural features that reduce the impact toughness. The separate solution treatment may be omitted if hot forging operation is fine tuned to solutionize sufficient Mg and Si during forging to offer adequate age hardening during the subsequent artificial ageing cycle. Uniform structures with a predominantly fine fibrous core thus obtained, ensure better fatigue and impact properties and a longer service life. The proposed process not only improves the quality of the automotive suspension components but also offers significant cost savings. (C) 2016 Elsevier B.V. All rights reserved.

引用

页码：25 / 32

页数：8

共 28 条

[1] Intermetallic phase selection in 1XXX Al alloys [J].

Allen, CM ;

O'Reilly, KAQ ;

Cantor, B ;

Evans, PV .

PROGRESS IN MATERIALS SCIENCE, 1998, 43 (02) :89-170

[2]

Altan T., 1983, METAL FORMING FUNDAM

[3]

Anderson M., 2001, LIGHT MET, V2001, P185

[4] The effect of processing and Mn content on the T5 and T6 properties of AA6082 profiles [J].

Birol, Y .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 173 (01) :84-91

[5] Pre-aging to improve bake hardening in a twin-roll cast Al-Mg-Si alloy [J].

Birol, Y .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 391 (1-2) :175-180

[6] Effect of extrusion press exit temperature and chromium on grain structure of EN AW 6082 alloy forgings [J].

Birol, Y. .

MATERIALS SCIENCE AND TECHNOLOGY, 2015, 31 (02) :207-211

[7] Effect of cast and extruded stock on grain structure of EN AW 6082 alloy forgings [J].

Birol, Y. ;

Ilgaz, O. .

MATERIALS SCIENCE AND TECHNOLOGY, 2014, 30 (07) :860-866

[8] Comparison of cast and extruded stock for the forging of AA6082 alloy suspension parts [J].

Birol, Yucel ;

Ilgaz, Onur ;

Akdi, Seracettin ;

Unuvar, Erdem .

ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES XVI, 2014, 939 :299-+

[9] Cooling slope casting to produce EN AW 6082 forging stock for manufacture of suspension components [J].

Birol, Yucel ;

Akdi, Seracettin .

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2014, 24 (06) :1674-1682

[10] THE EFFECT OF DISPERSOIDS ON THE MICROMECHANISMS OF CRACK EXTENSION IN AL-MG-SI ALLOYS [J].

BLIND, JA ;

MARTIN, JW .

JOURNAL OF MATERIALS SCIENCE, 1983, 18 (04) :1224-1234

← 1 2 3 →