RFID wireless system for detection of water in the annulus of a flexible pipe

Corrosive environments are responsible for the highest degree of degradation and failure in marine structures. The presence of sea water in marine structures such as flexible pipes can cause a significant reduction in their operational life, especially when associated with permeated gases, which could lead to corrosion related failure mechanisms such as corrosion-fatigue and hydrogen cracking. The ingress of sea water into flexible pipes can occur either due to ruptures in their external polymeric sheath or to permeation of condensed water from the pipe bore. This event since flooding of the so-called annular space of flexible pipes is the trigger for all knows corrosion assisted failure modes, it is clear that a system that is able to reliably detect the presence of water in the structure is highly desirable. This work will describe a radio frequency identification (RFID) system designed for this purpose; it relies on the measurement of shifts in the resonance frequency of specially-designed tags which would be inserted within the layers of the flexible pipe during manufacturing. This paper shows the design and validation process of these tags and also of a reader which is meant to be scanned along the outside surface of the pipe by a remotely-operated vehicle (ROV). The study was performed through a finite element analysis and a test in which the tags were inserted within a full-scale mock-up of a flexible riser, which was then flooded with synthetic seawater. Results show that the shift in response due to sea water is clearly identifiable and distinguishable from other effects.