PROCESSING OF HIGH-PERFORMANCE Nb3Sn WIRES THROUGH A NEW DIFFUSION REACTION USING Sn BASED ALLOYS

被引：0
|
作者：
Tachikawa, K. [1 ]
Sasaki, H. [1 ]
Yamaguchi, M. [1 ]
Hayashi, Y. [1 ]
Nakata, K. [1 ]
Takeuchi, T. [2 ]
机构：
[1] Tokai Univ, Fac Engn, Kanagawa 2591292, Japan
[2] Natl Inst Mat Sci, Tsukuba, Ibaraki 3050047, Japan
来源：
ADVANCES IN CRYOGENIC ENGINEERING (MATERIALS), VOL 56: TRANSACTIONS OF THE INTERNATIONAL CRYOGENIC MATERIALS CONFERENCE - ICMC | 2010年 / 1219卷
关键词：
Nb3Sn; Sn-Ta alloy; Sn-B alloy; Jelly Roll process; Multi-rod process; Microstructure; Superconducting performance;
D O I：
10.1063/1.3402297
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Tightly consolidated Sn-Ta and Sn-B based alloys have been prepared by the reaction among constituent metal powders at 750-775 degrees C. Sn-Ta and Sn-B based alloys exhibit quite similar microstructures. A small amount of Ti addition seems to improve the bonding between Ta or B particles and Sn matrix. Nb3Sn wires have been fabricated by the Jelly Roll (JR) and Multi-rod (MR) process using Sn based alloy sheet and rod, respectively Thick Nb3Sn layers with nearly stoichiometric A15 composition are synthesized through a new diffusion mechanism between Nb and Sn based alloy. B-c2 (4 2K)'s of 26.9T (mid) and 26.5T (mid) have been obtained in the JR and MR processed wires, respectively, using Sn-Ta based alloy. These wires exhibit enough non-Cu J(c) to be used above 20T and 4 2K. T-c of JR wires using Sn-B based sheet is 18.14K (offset) which is slightly higher than that of wires using Sn-Ta based sheet.
引用
收藏
页码：165 / +
页数：2
相关论文
共 50 条
  • [31] Interdiffusion and Growth of the Superconductor Nb3Sn in Nb/Cu(Sn) Diffusion Couples
    A.K. Kumar
    A. Paul
    Journal of Electronic Materials, 2009, 38 : 700 - 705
  • [32] Impact of Ti-doping position on Nb3Sn layer formation in internal Sn-processed Nb3Sn superconducting wires
    Morita, Taro
    Yagai, Tsuyoshi
    Banno, Nobuya
    CRYOGENICS, 2022, 122
  • [33] Diffusion Reaction Behavior in Internal Tin Nb3Sn Wire Using Nb/Cu-Ti/Sn-Zn Diffusion Configuration
    Morita, Taro
    Yagai, Tsuyoshi
    Banno, Nobuya
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2021, 31 (05)
  • [34] Stability of High-Jc Nb3Sn Wires in the Adiabatic Limit
    Ghosh, Arup K.
    Gregory, Eric
    Peng, Xuan
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2011, 21 (03) : 2380 - 2383
  • [35] Novel High-Tin Bronze and Nb3Sn Multifilamentary Wires
    Taniguchi, Hiroyasu
    Kikuchi, Akihiro
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2022, 32 (06)
  • [36] New IT-Processed Nb3Sn Wires With Cu Alloy Matrix
    Banno, Nobuya
    Miyamoto, Yasuo
    Tachikawa, Kyoji
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2017, 27 (04)
  • [37] PROPERTIES OF NB3SN DISCRETE FILAMENTARY WIRES BY A NEW RELIABLE PROCESS
    YOSHIZAKI, K
    WAKATA, M
    FUJIWARA, F
    IMAIZUMI, M
    TAGUCHI, O
    HASHIMOTO, Y
    IEEE TRANSACTIONS ON MAGNETICS, 1983, 19 (03) : 1128 - 1130
  • [38] Ti ADDED Nb3Sn WIRES BY NEW FABRICATION PROCESSES.
    Kohno, O.
    Ikeno, Y.
    Sadakata, N.
    Sugimoto, M.
    Agatsuma, K.
    Kaiho, K.
    IEEE Transactions on Magnetics, 1986, MAG-23 (02)
  • [39] Performance of a Nb3Sn Quadrupole Under High Stress
    Felice, H.
    Bajko, M.
    Bingham, B.
    Bordini, B.
    Bottura, L.
    Caspi, S.
    De Rijk, G.
    Dietderich, D.
    Ferracin, P.
    Giloux, C.
    Godeke, A.
    Hafalia, R.
    Milanese, A.
    Rossi, L.
    Sabbi, G. L.
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2011, 21 (03) : 1849 - 1853
  • [40] PERITECTIC REACTION IN SUPERCONDUCTOR NB3SN ( CB3SN )
    BACHNER, FJ
    GATOS, HC
    BANUS, MD
    TRANSACTIONS OF THE METALLURGICAL SOCIETY OF AIME, 1965, 233 (01): : 227 - &
12345