PROCESSING OF HIGH-PERFORMANCE Nb3Sn WIRES THROUGH A NEW DIFFUSION REACTION USING Sn BASED ALLOYS

被引:0
|
作者
Tachikawa, K. [1 ]
Sasaki, H. [1 ]
Yamaguchi, M. [1 ]
Hayashi, Y. [1 ]
Nakata, K. [1 ]
Takeuchi, T. [2 ]
机构
[1] Tokai Univ, Fac Engn, Kanagawa 2591292, Japan
[2] Natl Inst Mat Sci, Tsukuba, Ibaraki 3050047, Japan
关键词
Nb3Sn; Sn-Ta alloy; Sn-B alloy; Jelly Roll process; Multi-rod process; Microstructure; Superconducting performance;
D O I
10.1063/1.3402297
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Tightly consolidated Sn-Ta and Sn-B based alloys have been prepared by the reaction among constituent metal powders at 750-775 degrees C. Sn-Ta and Sn-B based alloys exhibit quite similar microstructures. A small amount of Ti addition seems to improve the bonding between Ta or B particles and Sn matrix. Nb3Sn wires have been fabricated by the Jelly Roll (JR) and Multi-rod (MR) process using Sn based alloy sheet and rod, respectively Thick Nb3Sn layers with nearly stoichiometric A15 composition are synthesized through a new diffusion mechanism between Nb and Sn based alloy. B-c2 (4 2K)'s of 26.9T (mid) and 26.5T (mid) have been obtained in the JR and MR processed wires, respectively, using Sn-Ta based alloy. These wires exhibit enough non-Cu J(c) to be used above 20T and 4 2K. T-c of JR wires using Sn-B based sheet is 18.14K (offset) which is slightly higher than that of wires using Sn-Ta based sheet.
引用
收藏
页码:165 / +
页数:2
相关论文
共 50 条
  • [1] Structure and High-Field Performance of New Nb3Sn Wires Fabricated From Sn-Based Alloys
    Tachikawa, Kyoji
    Hayashi, Yuuki
    Nakata, Koei
    Sasaki, Hiroki
    Yamaguchi, Masahiro
    Takeuchi, Takao
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2009, 19 (03) : 2584 - 2587
  • [2] New fabrication process for Nb3Sn conductors through diffusion reaction between Nb and Ag-Sn alloys
    Matsumoto, Gen
    Inoue, Kiyoshi
    Kikuchi, Akihiro
    Takeuchi, Takao
    Kiyoshi, Tsukasa
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2007, 17 (02) : 2580 - 2583
  • [3] Nb3Sn multifilamentary superconductors fabricated through a diffusion reaction between Nb and Ag-Sn alloys
    Matsumoto, G.
    Inoue, K.
    Kikuchi, A.
    Takeuchi, T.
    Kiyoshi, T.
    7TH EUROPEAN CONFERENCE ON APPLIED SUPERCONDUCTIVITY (EUCAS'05), 2006, 43 : 31 - 34
  • [4] Fabrication of new Nb3Sn wires through Brass method
    Tachikawa, Kyoji
    Banno, Nobuya
    Miyamoto, Yasuo
    PROCEEDINGS OF THE 27TH INTERNATIONAL SYMPOSIUM ON SUPERCONDUCTIVITY (ISS 2014), 2015, 65 : 161 - 164
  • [5] DIFFUSION OF NB AND SN IN POLYCRYSTALLINE NB3SN
    KNOX, RD
    WRIGHT, RN
    JOURNAL OF METALS, 1984, 36 (07): : 36 - 36
  • [6] Development of High-Performance Cu-Nb/Nb3Sn Wires for Various High Field Magnets
    Sugimoto, Masahiro
    Ii, Hideki
    Asami, Daisuke
    Kato, Tomoya
    Tsubouchi, Hirokazu
    Awaji, Satoshi
    Oguro, Hidetoshi
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2021, 31 (05)
  • [7] Multifilamentary Nb3Sn Wires Fabricated Through Internal Diffusion Process Using Brass Matrix
    Banno, Nobuya
    Miyamoto, Yasuo
    Tachikawa, Kyoji
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2016, 26 (03)
  • [8] Pure bending strand test of high performance Nb3Sn wires
    Harris, D. L.
    Allegritti, A. A.
    Takayasu, M.
    Minervini, J. V.
    ADVANCES IN CRYOGENIC ENGINEERING, VOL 54: TRANSACTIONS OF THE INTERNATIONAL CRYOGENIC MATERIALS CONFERENCE - ICMC, 2008, 986 : 341 - +
  • [9] Specific heat of Nb3Sn wires
    Wang, Y
    Senatore, C
    Abächerli, V
    Uglietti, D
    Flükiger, R
    SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 2006, 19 (04): : 263 - 266
  • [10] Artificial Pinning in Nb3Sn Wires
    Spina, Tiziana
    Ballarino, Amalia
    Bottura, Luca
    Scheuerlein, Christian
    Flukiger, Rene
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2017, 27 (04)