Corrosion Resistance of AISI 316L Stainless Steel Biomaterial after Plasma Immersion Ion Implantation of Nitrogen

被引：8
|
作者：
Zatkalikova, Viera [1 ]
Halanda, Juraj [2 ]
Vana, Dusan [2 ]
Uhricik, Milan [1 ]
Markovicova, Lenka [1 ]
Strbak, Milan [1 ]
Kucharikova, Lenka [1 ]
机构：
[1] Univ Zilina, Fac Mech Engn, Dept Mat Engn, Univ 8215-1, Zilina 01026, Slovakia
[2] Slovak Univ Technol Bratislava, Adv Technol Res Inst, Fac Mat Sci & Technol, Jana Bottu C 2781-25, Trnava 91724, Slovakia
来源：
MATERIALS | 2021年 / 14卷 / 22期
关键词：
plasma immersion ion implantation of nitrogen; austenitic stainless steel; corrosion resistance; potentiodynamic polarization; electrochemical impedance spectroscopy; BEHAVIOR;
D O I：
10.3390/ma14226790
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
Plasma immersion ion implantation (PIII) of nitrogen is low-temperature surface technology which enables the improvement of tribological properties without a deterioration of the corrosion behavior of austenitic stainless steels. In this paper the corrosion properties of PIII-treated AISI 316L stainless steel surfaces are evaluated by electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PP) and exposure immersion tests (all carried out in the 0.9 wt. % NaCl solution at 37 & PLUSMN; 0.5 & DEG;C) and compared with a non-treated surface. Results of the three performed independent corrosion tests consistently confirmed a significant increase in the corrosion resistance after two doses of PIII nitriding.
引用
收藏
页数：10
相关论文
共 50 条
  • [41] Stellite 6 Cladding on AISI Type 316L Stainless Steel: Microstructure, Nanohardness and Corrosion Resistance
    Jeyaprakash, N.
    Yang, Che-Hua
    Karuppasamy, Sundara Subramanian
    Duraiselvam, Muthukannan
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2023, 76 (02) : 491 - 503
  • [42] Optimum temperature on corrosion resistance for plasma ion nitrided 316L stainless steel in sea water solution
    Chong, Sang-Ok
    Kim, Seong-Jong
    JAPANESE JOURNAL OF APPLIED PHYSICS, 2017, 56 (01)
  • [43] Effects of Cryogenic Milling on Stress Corrosion Cracking Resistance of AISI 316L Austenitic Stainless Steel
    Chongwen Yang
    Wenqian Zhang
    Yujin Hu
    Xuelin Wang
    Journal of Materials Engineering and Performance, 2020, 29 : 7104 - 7114
  • [44] Effects of Cryogenic Milling on Stress Corrosion Cracking Resistance of AISI 316L Austenitic Stainless Steel
    Yang, Chongwen
    Zhang, Wenqian
    Hu, Yujin
    Wang, Xuelin
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (11) : 7104 - 7114
  • [45] Long-range effect in nitrogen ion-implanted AISI 316L stainless steel
    Budzynski, P.
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2015, 342 : 1 - 6
  • [46] Modeling of nitrogen penetration in polycrystalline AISI 316L austenitic stainless steel during plasma nitriding
    Moskalioviene, T.
    Galdikas, A.
    Riviere, J. P.
    Pichon, L.
    SURFACE & COATINGS TECHNOLOGY, 2011, 205 (10): : 3301 - 3306
  • [47] Surface hardening of AISI 316L stainless steel using plasma carburizing
    Suh, BS
    Lee, WJ
    THIN SOLID FILMS, 1997, 295 (1-2) : 185 - 192
  • [48] Improvements in localized corrosion resistance of nitrogen ion implanted type 316L stainless steel orthopaedic implant devices
    Veerabadran, KM
    Mudali, UK
    Nair, KGM
    Subbaiyan, M
    HIGH NITROGEN STEELS '98, 1999, 318-3 : 561 - 567
  • [49] Improvements in localized corrosion resistance of nitrogen ion implanted type 316L stainless steel orthopaedic implant devices
    Department of Analytical Chemistry, University of Madras, Guindy Campus, Madras 600 025, India
    不详
    Mater Sci Forum, (561-568):
  • [50] Intensified plasma-assisted nitriding of AISI 316L stainless steel
    Singh, V
    Marchev, K
    Cooper, CV
    Meletis, EI
    SURFACE & COATINGS TECHNOLOGY, 2002, 160 (2-3): : 249 - 258
12345