Corrosion Resistance of AISI 316L Stainless Steel Biomaterial after Plasma Immersion Ion Implantation of Nitrogen

被引：8

作者：

Zatkalikova, Viera ^{[1
]}

Halanda, Juraj ^{[2
]}

Vana, Dusan ^{[2
]}

Uhricik, Milan ^{[1
]}

Markovicova, Lenka ^{[1
]}

Strbak, Milan ^{[1
]}

Kucharikova, Lenka ^{[1
]}

机构：

[1] Univ Zilina, Fac Mech Engn, Dept Mat Engn, Univ 8215-1, Zilina 01026, Slovakia

[2] Slovak Univ Technol Bratislava, Adv Technol Res Inst, Fac Mat Sci & Technol, Jana Bottu C 2781-25, Trnava 91724, Slovakia

来源：

MATERIALS | 2021年 / 14卷 / 22期

关键词：

plasma immersion ion implantation of nitrogen; austenitic stainless steel; corrosion resistance; potentiodynamic polarization; electrochemical impedance spectroscopy; BEHAVIOR;

D O I：

10.3390/ma14226790

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

Plasma immersion ion implantation (PIII) of nitrogen is low-temperature surface technology which enables the improvement of tribological properties without a deterioration of the corrosion behavior of austenitic stainless steels. In this paper the corrosion properties of PIII-treated AISI 316L stainless steel surfaces are evaluated by electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PP) and exposure immersion tests (all carried out in the 0.9 wt. % NaCl solution at 37 & PLUSMN; 0.5 & DEG;C) and compared with a non-treated surface. Results of the three performed independent corrosion tests consistently confirmed a significant increase in the corrosion resistance after two doses of PIII nitriding.

引用

页数：10

共 50 条

[1] Biomaterial Studies on AISI 316L Stainless Steel after Magnetoelectropolishing
Hryniewicz, Tadeusz
Rokosz, Krzysztof
Filippi, Massimiliano
MATERIALS, 2009, 2 (01) : 129 - 145
[2] Improved corrosion resistance of stainless steel 316L by Ti ion implantation
Feng, Kai
Cai, Xun
Li, Zhuguo
Chu, Paul K.
MATERIALS LETTERS, 2012, 68 : 450 - 452
[3] Corrosion behavior of ion nitrided AISI 316L stainless steel
Nosei, L.
Farina, S.
Avalos, M.
Nachez, L.
Gomez, B. J.
Feugeas, J.
THIN SOLID FILMS, 2008, 516 (06) : 1044 - 1050
[4] Enhanced corrosion resistance of austenitic stainless steel by plasma immersion ion implantation of nitrogen
Pham, MT
Rao, KRM
Manna, I
Richter, E
JOURNAL OF MATERIALS SCIENCE LETTERS, 2003, 22 (15) : 1099 - 1100
[5] Corrosion resistance of magnetoelectropolished AISI 316L SS biomaterial
Hryniewicz, Tadeusz
Rokosz, Krzysztof
ANTI-CORROSION METHODS AND MATERIALS, 2014, 61 (02) : 57 - 64
[6] Effect of applied pulse voltage on nitrogen plasma immersion ion implantation of AISI 316 austenitic stainless steel
Mukherjee, S
Raole, PM
John, PI
SURFACE & COATINGS TECHNOLOGY, 2002, 157 (2-3): : 111 - 117
[7] Enhancement of corrosion resistance of AISI 420 stainless steels by nitrogen and silicon plasma immersion ion implantation
Fu, Ricky K. Y.
Tang, D. L.
Wan, G. J.
Chu, Paul K.
SURFACE & COATINGS TECHNOLOGY, 2007, 201 (9-11): : 4879 - 4883
[8] THE EFFECT OF ION-IMPLANTATION ON THE RESISTANCE OF 316L STAINLESS-STEEL TO CREVICE CORROSION
BOMBARA, G
CAVALLINI, M
DEARNALEY, G
GOODE, PD
FRATESI, R
SURFACE TECHNOLOGY, 1983, 18 (01): : 21 - 30
[9] Effect of nitrogen ion implantation on the corrosion resistance of titanium modified type 316L stainless steel in comparison with argon and oxygen ion implantation
Sundararajan, T
Mudali, UK
Nair, KGM
Subbaiyan, M
HIGH NITROGEN STEELS '98, 1999, 318-3 : 553 - 559
[10] Wear resistance evaluation of plasma nitrocarburized AISI 316L stainless steel
Chang, CN
Chen, FS
MATERIALS CHEMISTRY AND PHYSICS, 2003, 82 (02) : 281 - 287

← 1 2 3 4 5 →