Isothermal oxidation of Ti-6Al-7Nb alloy

被引：34
作者：
Aniolek, K. [1 ]
Kupka, M. [1 ]
Luczuk, M. [1 ]
Barylski, A. [1 ]
机构：
[1] Univ Silesia, Inst Mat Sci, PL-41500 Chorzow, Poland
来源：
VACUUM | 2015年 / 114卷
关键词：
Titanium alloy; Oxidation; Scale; SEM; SURFACE MODIFICATION; TITANIUM-ALLOYS; CORROSION-RESISTANCE; BEHAVIOR; TEMPERATURE; NB;
D O I：
10.1016/j.vacuum.2015.01.016
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The properties of Ti-6Al-7Nb alloy oxidation in the temperature range from 500 to 800 degrees C, in various time periods between 20 min and 72 h, were examined. The rate of oxidation at temperatures of 600, 700 and 800 degrees C, determined on the basis of the weight gain, was described by a parabolic equation. The obtained oxidation activation energy value was 170 kJ/mol. In addition to oxidation kinetics, the phase composition and the surface morphology of the formed scale were determined. The phase composition of the oxide layers was complex and it changed with the oxidation temperature. At a higher temperature titanium oxide TiO2 in the form of rutile was the predominant phase. The continuity of the scale and the size of forming it oxide particles were increasing with temperature. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：114 / 118
页数：5
相关论文
共 36 条
[21]  
Krasicka-Cydzik E, 2003, ZIELONA GORA
[22]   Oxidation behavior of titanium alloy under diffusion bonding [J].
Lee, Ho-Sung ;
Yoon, Jong-Hoon ;
Yi, Yeong-Moo .
THERMOCHIMICA ACTA, 2007, 455 (1-2) :105-108
[23]  
Leyens Christoph., 2006, Titanium and Titanium Alloys: Fundamentals and Applications, DOI [10.1002/tox.23349, DOI 10.1002/SMLL.202102046]
[24]   Structural characterization of titanium oxide layers prepared by plasma based ion implantation with oxygen on Ti6A14V alloy [J].
Li, Jinlong ;
Sun, Mingren ;
Ma, Xinxin .
APPLIED SURFACE SCIENCE, 2006, 252 (20) :7503-7508
[25]   Surface modification of titanium, titanium alloys, and related materials for biomedical applications [J].
Liu, XY ;
Chu, PK ;
Ding, CX .
MATERIALS SCIENCE & ENGINEERING R-REPORTS, 2004, 47 (3-4) :49-121
[26]  
Matthew J.Donachie., 2000, TITANIUM TECHNICAL G
[27]   Effects of load and sliding speed on the tribological behaviour of Ti-6Al-4V plasma nitrided at different temperatures [J].
Molinari, A ;
Straffelini, G ;
Tesi, B ;
Bacci, T ;
Pradelli, G .
WEAR, 1997, 203 :447-454
[28]   Corrosion resistance and corrosion fatigue strength of new titanium alloys for medical implants without V and Al [J].
Okazaki, Y ;
Ito, Y ;
Kyo, K ;
Tateishi, T .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1996, 213 (1-2) :138-147
[29]  
Onyszkiewicz E, 1997, SOLID MET ALLOYS, V30, P179
[30]   The effect of niobium on the oxidation behaviour of titanium in N2/20% O2 atmospheres [J].
Pérez, P ;
Haanappel, VAC ;
Stroosnijder, MF .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 284 (1-2) :126-137
1234