Shrinkage of high-strength lightweight aggregate concrete exposed to dry environment

被引:0
|
作者
Zhang, MH [1 ]
Li, L
Paramasivam, P
机构
[1] Natl Univ Singapore, Dept Civil Engn, Singapore 117548, Singapore
[2] Kumaraguru Coll Technol, Coimbatore, Tamil Nadu, India
关键词
concrete; drying shrinkage; flexural strength; lightweight aggregate; modulus of elasticity; silica fume;
D O I
暂无
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This paper presents results of an experimental study on the shrinkage for up to approximately 2 years of high-strength lightweight concrete exposed to a dry environment compared with that of the normalweight concrete. Normalweight sand was used for all of the concrete mixtures. The results indicated that the shrinkage of the normalweight concrete with granite aggregate was higher than that of the corresponding lightweight concretes with equivalent mixture proportioning in the first 6 months. The shrinkage decreased with a decrease in the aggregate density that corresponded to an increase in the aggregate porosity and water absorption. After I year the shrinkage of the lightweight concretes was somewhat higher than that of the normalweight concrete with one exception. The same trend was observed for the lightweight concrete with expanded clay aggregate (particle density = 1.24) and the normalweight concrete with a similar 28-day compressive strength. The shrinkage value was reduced with an increase in the fiber content from 0 to 1.5% by volume of the lightweight concrete. The incorporation of 5% silica fume reduced the shrinkage of the concrete significantly, and its effect on the lightweight concrete was more substantial than that on the normalweight concrete.
引用
收藏
页码:86 / 92
页数:7
相关论文
共 50 条
  • [1] Shrinkage and creep of high-strength lightweight aggregate concrete
    Sun, Hailin
    Ye, Lieping
    Ding, Jiantong
    Guo, Yushun
    Qinghua Daxue Xuebao/Journal of Tsinghua University, 2007, 47 (06): : 765 - 767
  • [2] New approach for shrinkage prediction of high-strength lightweight aggregate concrete
    Costa, Hugo
    Julio, Eduardo
    Lourenco, Jorge
    CONSTRUCTION AND BUILDING MATERIALS, 2012, 35 : 84 - 91
  • [3] Comparison of prediction models for shrinkage and creep of high-strength, lightweight aggregate concrete
    Mei, Sheng-qi
    Xie, Hui-bing
    Su, Li
    Gong, Jian
    Guo, Kun
    Wang, Yuan-feng
    GREEN BUILDING, ENVIRONMENT, ENERGY AND CIVIL ENGINEERING, 2017, : 31 - 35
  • [4] Autogenous Shrinkage of High Strength Lightweight Aggregate Concrete
    丁庆军
    JournalofWuhanUniversityofTechnology-MaterialsScience, 2005, (04) : 123 - 125
  • [5] Autogenous shrinkage of high strength lightweight aggregate concrete
    Ding, QJ
    Tian, YG
    Wang, FZ
    Zhang, F
    Hu, SG
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2005, 20 (04): : 123 - 125
  • [6] Autogenous shrinkage of high strength lightweight aggregate concrete
    Ding Q.
    Tian Y.
    Wang F.
    Zhang F.
    Hu S.
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2005, 20 (4): : 123 - 125
  • [7] Dry shrinkage features of high-strength recycled concrete
    Zeng, Li
    Zhao, Wei
    Tumu Jianzhu yu Huanjing Gongcheng/Journal of Civil, Architectural and Environmental Engineering, 2010, 32 (04): : 125 - 130
  • [8] Study on early autogenous shrinkage and crack resistance of fly ash high-strength lightweight aggregate concrete
    Gao, Yingli
    Zhang, Hailun
    Tang, Shuai
    Liu, He
    MAGAZINE OF CONCRETE RESEARCH, 2013, 65 (15) : 906 - 913
  • [9] Compressive strength of lightweight aggregate concrete exposed to high temperatures
    Bingöl, AF
    Gül, R
    INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2004, 11 (01) : 68 - 72
  • [10] Confinement in bending of high-strength lightweight aggregate concrete beams
    Zivkovic, Jelena
    Overli, Jan Arve
    STRUCTURES, 2022, 39 : 419 - 433