Anisotropic mechanical properties of extrusion-based 3D printed layered concrete

被引：24

作者：

Liu, Chenkang ^{[1
]}

Yue, Songlin ^{[2
]}

Zhou, Cong ^{[2
]}

Sun, Honglei ^{[3
]}

Deng, Shuxin ^{[1
]}

Gao, Fei ^{[1
]}

Tan, Yizhong ^{[2
]}

机构：

[1] Nanjing Univ Sci & Technol, Sch Mech Engn, Nanjing 210094, Peoples R China

[2] Army Engn Univ PLA, State Key Lab Disaster Prevent & Mitigat Explos &, Nanjing 210007, Jiangsu, Peoples R China

[3] Hebei Univ Technol, Sch Civil Engn & Transportat, Tianjin 300401, Peoples R China

来源：

JOURNAL OF MATERIALS SCIENCE | 2021年 / 56卷 / 30期

基金：

中国国家自然科学基金;

关键词：

HARDENED PROPERTIES; PERFORMANCE; PROPAGATION; FABRICATION; CHALLENGES; POLYMERS; METALS;

D O I：

10.1007/s10853-021-06416-w

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Extrusion-based 3D printed concrete is a promising material and processing technique for use in the construction industry. In this study, 3D printed specimens were loaded dynamically and statically to investigate their anisotropic characteristics. The experimental results showed that the average static compressive strength of the 3D printed concrete specimens was 115% of that of the cast specimens. Meanwhile, the dynamic compressive strength of DX specimens was significantly larger than that of other 3D printed specimens and cast specimens under the same impact pressure. In particular, ultrasonic pulse velocity values were used to quantitatively represent the anisotropy of 3D printed specimens. In conclusion, the anisotropic characteristics of 3D printed concrete were studied. The results indicate that the performance of 3D printed concrete was best (especially in the X-direction). The results provide a reference for engineers looking to design 3D printed components for use in construction.

引用

页码：16851 / 16864

页数：14

共 50 条

[1] Anisotropic mechanical properties of extrusion-based 3D printed layered concrete
Chenkang Liu
Songlin Yue
Cong Zhou
Honglei Sun
Shuxin Deng
Fei Gao
Yizhong Tan
Journal of Materials Science, 2021, 56 : 16851 - 16864
[2] Evaluating the effects of porosity on the mechanical properties of extrusion-based 3D printed concrete
van den Heever, Marchant
du Plessis, Anton
Kruger, Jacques
van Zijl, Gideon
CEMENT AND CONCRETE RESEARCH, 2022, 153
[3] An investigation into the porosity of extrusion-based 3D printed concrete
Kruger, Jacques
du Plessis, Anton
van Zijl, Gideon
ADDITIVE MANUFACTURING, 2021, 37 (37)
[4] Microstructure and mechanical properties of interlayer regions in extrusion-based 3D printed concrete: A critical review
Ding, Tao
Xiao, Jianzhuang
Mechtcherine, Viktor
CEMENT & CONCRETE COMPOSITES, 2023, 141
[5] BASIC FRESH-STATE PROPERTIES OF EXTRUSION-BASED 3D PRINTED CONCRETE
Bukvic, Olivera
Radonjanin, Vlastimir
Malesev, Mirjana
Laban, Mirjana
GRADEVNSKI MATERIJIALI I KONSTRUKCIJE-BUILDING MATERIALS AND STRUCTURES, 2020, 63 (04): : 99 - 117
[6] Mechanical characterisation for numerical simulation of extrusion-based 3D concrete printing
van den Heever, Marchant
Bester, Frederick
Kruger, Jacques
van Zijl, Gideon
JOURNAL OF BUILDING ENGINEERING, 2021, 44
[7] Extrusion-based 3D printed biodegradable porous iron
Putra, N. E.
Leeflang, M. A.
Minneboo, M.
Taheri, P.
Fratila-Apachitei, L. E.
Mol, J. M. C.
Zhou, J.
Zadpoor, A. A.
ACTA BIOMATERIALIA, 2021, 121 (121) : 741 - 756
[8] On the origins of anisotropy of extrusion-based 3D printed concrete: The roles of filament skin and agglomeration
Kolawole, John Temitope
Buswell, Richard
Mahmood, Sultan
Isa, Muhammad Nura
Cavalaro, Sergio
Austin, Simon
Engelberg, Dirk
Dobrzanski, James
Xu, Jerry
Withers, Philip J.
CEMENT AND CONCRETE RESEARCH, 2025, 192
[9] On the geometrical origin of the anisotropy in extrusion-based 3d printed structures
Mesnil, Romain
Poussard, Valentin
Sab, Karam
Caron, Jean-Francois
ENGINEERING STRUCTURES, 2023, 275
[10] Multiscale analysis for characterization of tensile properties in extrusion-based 3D printed carbon nanocomposites
Shin, Wonjun
Han, Jihoon
ADDITIVE MANUFACTURING, 2024, 84

← 1 2 3 4 5 →