Ageing kinetics of SiCp reinforced Al metal matrix composites

被引：1
|
作者：
Mane, Praveen J. [1 ]
Shantharaja, M. [1 ]
机构：
[1] Bangalore Univ, Univ Visvesvaraya Coll Engn UVCE, Dept Mech Engn, Bengaluru 560001, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2021年 / 46卷
关键词：
Precipitation; Metal matrix composites; Ageing; PRECIPITATION;
D O I：
10.1016/j.matpr.2021.02.703
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Metal Matrix composites have been used widely in structural application due to their excellent load sharing mechanism, strength and durability. These properties get amplified when matrices of age hardenable alloys are used. In present study, extruded Al6061 matrix composites with SiCp as reinforcements were subjected to T6 heat treatment. The hardness (VHN) was determined for composite and base alloy specimens for different ageing times. SEM and TEM characterization were carried out to observe matrix- reinforcement interface and precipitate formation. A 30% increase in hardness was observed due to addition of SiC reinforcements. The hardness increment in aged samples of Al6061 alloy and Al-SiC composite when compared to their untreated samples were 52% and 55% respectively. Peak ageing of the composite and its base alloy occurred at 3 h and 5 h respectively. (c) 2021 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the 3rd International Conference on Materials, Manufacturing and Modelling.
引用
收藏
页码：7962 / 7965
页数：4
相关论文
共 50 条
  • [1] Wear Evaluation of SiCp Reinforced Al Matrix Composites Coatings
    Kim, Kyuntak
    Kim, Yeongsik
    STRUCTURAL INTEGRITY AND FAILURE, 2011, 275 : 178 - 181
  • [2] Investigation of mechanical properties of SiCp reinforced Al 7075 metal matrix composites: a case study
    Das, Diptikanta
    Sharma, Milind
    Samal, Chandrika
    Nayak, Ramesh Kumar
    MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 3958 - 3965
  • [3] Influence of Reinforced Particles on Chip Formation Process in Cutting SiCp/Al Metal Matrix Composites
    Duan C.
    Liu Y.
    Sun W.
    Che M.
    Binggong Xuebao/Acta Armamentarii, 2019, 40 (01): : 208 - 218
  • [4] Elastic constant matrix measurement of SiCp reinforced aluminum metal matrix composites
    School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China
    不详
    Beijing Hangkong Hangtian Daxue Xuebao, 2009, 2 (162-165):
  • [5] Pitting behavior of SiCp 2024 Al metal matrix composites
    Feng, Z
    Lin, C
    Lin, J
    Luo, J
    JOURNAL OF MATERIALS SCIENCE, 1998, 33 (23) : 5637 - 5642
  • [6] Pitting behavior of SiCp/2024 Al metal matrix composites
    Z. FENG
    C. LIN
    J. LIN
    J. LUO
    Journal of Materials Science, 1998, 33 : 5637 - 5642
  • [7] CORROSION BEHAVIOR OF SICP 6061 AL METAL MATRIX COMPOSITES
    SUN, H
    KOO, EY
    WHEAT, HG
    CORROSION, 1991, 47 (10) : 741 - 753
  • [8] Fabrication and development of SiCp/Al metal-matrix composites
    Ouyang, Liuzhang
    Luo, Chengping
    Sui, Xiandong
    Luo, Zhuoxuan
    Zhuzao/Foundry, 2000, 49 (01): : 17 - 20
  • [9] Research on the Characters of the Cutting Force in Vibration Cutting Particle Reinforced Metal Matrix Composites SiCp/Al
    LIU Chuan-shao 1
    2. Institute of Mechanical Engineering
    厦门大学学报(自然科学版), 2002, (S1) : 74 - 75
  • [10] Microstructure and interface structure studies of SiCp-reinforced Al (6061) metal-matrix composites
    Wang, R.M.
    Surappa, M.K.
    Tao, C.H.
    Li, C.Z.
    Yan, M.G.
    Materials Science and Engineering A, 1998, A254 (1-2): : 219 - 226
12345