Punching Resistance of Flat Slabs with Openings Adjacent to the Columns

被引：8
|
作者：
Santos, Julia B. [1 ,2 ]
Souza, Raphael M. [3 ]
Melo, Guilherme S. [4 ]
Comes, Ronaldo B. [5 ]
机构：
[1] Univ Brasilia, Brasilia, DF, Brazil
[2] Goias Fed Inst, Goiania, Go, Brazil
[3] Fed Ctr Technol Educ Minas Gerais, Belo Horizonte, MG, Brazil
[4] Univ Brasilia, Dept Civil & Environm Engn, Brasilia, DF, Brazil
[5] Univ Fed Goias, Postgrad Course Civil Engn, Goiania, Go, Brazil
来源：
ACI STRUCTURAL JOURNAL | 2022年 / 119卷 / 01期
关键词：
adjacent openings; flat slabs; punching shear; rectangular column; reinforced concrete; SHEAR-STRENGTH;
D O I：
10.14359/51734216
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
The influence of openings in punching shear resistance was investigated, testing eight interior slab-column connections 94.5 in. (2400 mm) square and 5.9 in. (150 mm) thick, with rectangular columns and without shear reinforcement. The openings (one or two) were adjacent to the sides of rectangular supports and had widths equal to 15.7 x 15.7 in. (400 x 400 mm); 7.9 x 7.9 in. (200 x 200 mm); and 7.9 x 11.8 in. (200 x 300 mm). The results of cracking and ultimate loads, vertical displacements, and flexural reinforcement strains were analyzed, and the test results were compared with estimates by ACI 318-19, Eurocode 2 (2014), ABNT NBR 6118:2014, and fib Model Code 2010 (2013). It was shown that the estimates for the slabs with asymmetric large dimension holes improved for all codes considering the eccentricity, as recommended by Joint ACI-ASCE Committee 421.
引用
收藏
页码：41 / 53
页数：13
相关论文
共 50 条
  • [31] Contribution of concrete and shear reinforcement to the punching shear resistance of flat slabs
    Schmidt, Philipp
    Kueres, Dominik
    Hegger, Josef
    ENGINEERING STRUCTURES, 2020, 203
  • [32] Punching of RC slabs without transverse reinforcement supported on elongated columns
    Setiawan, Andri
    Vollum, Robert L.
    Macorini, Lorenzo
    Izzuddin, Bassam A.
    STRUCTURES, 2020, 27 : 2048 - 2068
  • [33] POST-TENSIONED CONCRETE FLAT SLABS WITH EDGE COLUMNS SUBMITTED TO PUNCHING SHEAR
    Barban, Vladimir V.
    Melo, Guilherme S.
    FIB SYMPOSIUM PRAGUE 2011: CONCRETE ENGINEERING FOR EXCELLENCE AND EFFICIENCY, VOLS 1 AND 2, 2011, : 163 - 166
  • [34] Punching shear tests of post-tensioned flat slabs supported on edge columns
    Barban, Vladimir V.
    Melo, Guilherme S.
    Carvalho, Alessandra L.
    STRUCTURAL CONCRETE, 2020, 21 (01) : 247 - 261
  • [35] Punching shear in flat slabs with re-entrant corner columns and shear reinforcement
    Siqueira, Joao Paulo de Almeida
    de Albuquerque, Elaine Jaricuna Pereira
    Ruiz, Miguel Fernandez
    Melo, Guilherme Sales
    ENGINEERING STRUCTURES, 2024, 310
  • [36] Punching strength of flat slabs with and without shear reinforcement
    Bartolac, Marko
    Damjanovic, Domagoj
    Duvnjak, Ivan
    GRADEVINAR, 2015, 67 (08): : 771 - 786
  • [37] Punching shear tests in flat slabs supported on re-entrant corner columns
    Siqueira, Joao Paulo de Almeida
    Albuquerque, Elaine Jaricuna Pereira de
    Ruiz, Miguel Fernandez
    Melo, Guilherme Sales
    ENGINEERING STRUCTURES, 2024, 308
  • [38] CFRP strengthening efficiency on enhancement punching shear resistance of RC bubbled slabs with openings
    Oukaili, Nazar K.
    Merie, Hammad D.
    CASE STUDIES IN CONSTRUCTION MATERIALS, 2021, 15
  • [39] Effect of column size on punching behavior of flat slabs with square columns: Numerical investigation
    Zheng, Bowen
    Zheng, Wenzhong
    Wang, Lu
    Zhang, Yanzhe
    JOURNAL OF BUILDING ENGINEERING, 2023, 79
  • [40] Punching shear of continuous flat reinforced concrete slabs
    Gardner, NJ
    Shao, XY
    ACI STRUCTURAL JOURNAL, 1996, 93 (02) : 218 - 228
12345