The use of computed tomography to assist orthopaedic surgery in 86 horses (2002-2010)

P>Imaging-assisted orthopaedic surgery is becoming part of routine orthopaedic practice in horses and several techniques have been reported. However, there are no published reports describing the use of intraoperative computed tomography (CT) for surgical guidance and immediate post operative control in the horse. This use of CT in equine orthopaedics is currently limited because of the logistic problems associated with availability of CT scans in surgical theatres as well as concerns over radiation safety. The aim of this report was retrospectively to report CT assisted orthopaedic surgical cases in our practice through identifying the types of surgery where it was used, to list the technical problems that were encountered, to describe solutions to these, and to discuss the applications of the technique. All surgical procedures were performed with the assistance of a peripheral quantitative computed tomography (pQCT) scanner. CT assisted orthopaedic surgery in 86 patients during the study period. Reasons for CT included: 1) use of CT at the beginning of the surgical procedure to document the lesion and identify surgical landmarks (n = 75); 2) pre, intra- and post operative use of CT in comminuted fractures of the middle or proximal phalanx to guide and control internal fixation (n = 7); and 3) post operative use of CT to monitor the results of the surgical procedure (n = 4). Proper planning in both the draping steps and the use of polyvinyl splints to stabilise the limb allowed for movements of the gantry around the limb. The time required to obtain one slice was not dissimilar to the time that is necessary to take and process a single digital radiograph. The radiation dose with the pQCT described here is < 0.5 mu Sv and its acquisition time should be balanced against radiation risks of conventional CT systems.