Treatment of ITER plasma facing components: Current status and remaining open issues before ITER implementation

被引:28
|
作者
Grisolia, C. [1 ]
Counsell, G.
Dinescu, G.
Semerok, A.
Bekris, N.
Coad, P.
Hopf, C.
Roth, J.
Rubel, M.
Widdowson, A.
Tsitrone, E.
机构
[1] CEA Cadarache, EURATOM Assoc, CEA, DSM, F-13108 St Paul Les Durance, France
[2] CEA Cadarache, DRFC, SIPP, F-13108 St Paul Les Durance, France
[3] EURATOM, UKAEA, Culham Sci Ctr, Abingdon OX14 3BD, Oxon, England
[4] EURATOM, MdEC, NILPRP, R-077125 Bucharest, Romania
[5] CEA Saclay, DEN, DPC, SCP, F-91191 Gif Sur Yvette, France
[6] CEA Saclay, LILM, F-91191 Gif Sur Yvette, France
[7] Forschungszentrum Karlsruhe, D-76021 Karlsruhe, Germany
[8] EURATOM, Max Planck Inst Plasmaphys, D-85748 Garching, Germany
[9] EURATOM, Royal Inst Technol, Alfven Lab, S-10044 Stockholm, Sweden
关键词
detritiation techniques; fuel cycle; ITER;
D O I
10.1016/j.fusengdes.2007.05.047
中图分类号
TL [原子能技术]; O571 [原子核物理学];
学科分类号
0827 ; 082701 ;
摘要
The in-vessel tritium inventory control is one of the most ITER challenging issues which has to be resolved to fulfil safety requirements. This is due mainly to the presence of carbon as a constituent of plasma facing components (PFCs) which leads to a high fuel permanent retention. For several years now, physics studies and technological developments have been undertaken worldwide in order to develop reliable techniques which could be used in ITER severe environment (magnetic field, vacuum, high temperature) for in situ tritium recovery. The scope of this contribution is to review the present status of these achievements and define the remaining work to be done in order to propose a dedicated work program. Different treatment techniques (chemical treatments, photonic cleaning) will be reviewed. In the frame of ITER, they will be compared in terms of fuel removal rate as well as surface accessibility, type of production (gas or particulates), ability to clean mixed material. And lastly, consequences of bulk trapping observed in tokamak on the techniques currently under development will be addressed. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码:2390 / 2398
页数:9
相关论文
共 50 条
  • [31] Tritium in plasma-facing components of JET with the ITER-Like-Wall
    Pajuste, E.
    Teimane, A. S.
    Kizane, G.
    Avotina, L.
    Halitovs, M.
    Lescinskis, A.
    Vitins, A.
    Kalnina, P.
    Lagzdina, E.
    Zabolockis, R. J.
    PHYSICA SCRIPTA, 2021, 96 (12)
  • [32] Microstructure of a C/C-Cu joint for plasma facing components of the ITER
    Eidenberger, Elisabeth
    Scheu, Christina
    Hawranek, Gerhard
    Leitner, Harald
    Clemens, Helmut
    Pippan, Reinhard
    Schedler, Bertram
    PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 2007, 44 (09): : 403 - 412
  • [33] A review of the US joining technologies for plasma facing components in the ITER fusion reactor
    Odegard, BC
    Cadden, CH
    Watson, RD
    Slattery, KT
    JOURNAL OF NUCLEAR MATERIALS, 1998, 258 : 329 - 334
  • [34] Development of the plasma facing components for the dome-liner component of the ITER divertor
    Luconi, U
    Di Marco, A
    Federici, A
    Grattarola, A
    Gualco, G
    Larrea, JM
    Merola, M
    Ozzano, C
    Pasquale, G
    FUSION ENGINEERING AND DESIGN, 2005, 75-79 : 271 - 276
  • [35] Review of the US joining technologies for plasma facing components in the ITER fusion reactor
    Odegard Jr., B.C.
    Cadden, C.H.
    Watson, R.D.
    Slattery, K.T.
    Journal of Nuclear Materials, 1998, 258-263 (pt A): : 329 - 334
  • [36] Comparative analysis of copper alloys for the heat sink of plasma facing components in ITER
    Kalinin, G
    Matera, R
    JOURNAL OF NUCLEAR MATERIALS, 1998, 258 : 345 - 350
  • [37] Experimental activity on the definition of acceptance criteria for the ITER divertor plasma facing components
    Escourbiac, F.
    Constans, S.
    Vignal, N.
    Cantone, V.
    Richou, M.
    Durocher, A.
    Riccardi, B.
    Bobin, I.
    Jouvelot, J. L.
    Merola, M.
    FUSION ENGINEERING AND DESIGN, 2009, 84 (2-6) : 747 - 751
  • [38] A review of the US joining technologies for plasma facing components in the ITER fusion reactor
    Odegard, BC
    Cadden, CH
    Watson, RD
    Nygren, R
    Slattery, KT
    17TH IEEE/NPSS SYMPOSIUM ON FUSION ENGINEERING, VOLS 1 AND 2, 1998, : 337 - 343
  • [39] Overview of manufacturing technologies under development in Russia for ITER plasma facing components
    Giniyatulin, R. N.
    Mazul, I. V.
    Gervash, A. A.
    Guryeva, T. M.
    Kuznetcov, V. E.
    Makhankov, A. N.
    Okunev, A. A.
    Sevrukov, O. N.
    FUSION ENGINEERING AND DESIGN, 2018, 136 : 527 - 533
  • [40] Protection of the plasma facing components in the WEST tokamak, progress and development in view of ITER
    Houry, M.
    Aumeunier, M-h.
    Corre, Y.
    Courtois, X.
    Mitteau, R.
    Loarer, TH.
    Dubus, L.
    Gauthier, E.
    Gerardin, J.
    Gorse, V.
    Grelier, E.
    Juven, A.
    Malard, PH.
    Moncada, V.
    Tichit, Q.
    Vives, S.
    Gaspar, J.
    WEST Team
    NUCLEAR FUSION, 2025, 65 (01)