A robust model for rolling of thin strip and foil

被引:97
|
作者
Le, HR [1 ]
Sutcliffe, MPF [1 ]
机构
[1] Univ Cambridge, Dept Engn, Cambridge CB2 1PZ, England
基金
英国工程与自然科学研究理事会;
关键词
Neutral zone - Contact pressure;
D O I
10.1016/S0020-7403(00)00092-8
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
A new analysis for cold rolling of thin strip and foil is developed. This model follows the approach of Fleck et al. [8] but relaxes their assumption of a central flat neutral zone. Instead of following their inverse method to obtain the pressure distribution in this neutral zone, an explicit equation for the contact pressure variation is obtained from the sticking condition in this region. This significantly simplifies the solution method, leading to a much more robust algorithm. Moreover the method treats the cases either where the roll retains its circular are or where there is very significant roll deformation in the same way, greatly simplifying the method of obtaining solutions. This will facilitate the incorporation of other effects such as the friction models currently being developed. Results are in line with the theory of Fleck et al. [8]. The effect of entry and exit tensions on the non-dimensional load and forward slip is investigated. It is found that the effect of equal entry and exit tensions is equivalent to reducing the yield stress of the strip by this tension stress. (C) 2001 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:1405 / 1419
页数:15
相关论文
共 50 条
  • [21] Modeling of Strip Shape during Cold Rolling of Thin Strip
    Jiang, Zhengyi
    Du, X. Z.
    Du, Y. B.
    Wei, D. B.
    Hay, M.
    ADVANCES IN MATERIALS PROCESSING IX, 2010, 443 : 9 - +
  • [22] Experimental measurements of load and strip profile in thin strip rolling
    Cambridge Univ Engineering Dep, Cambridge, United Kingdom
    Int J Mech Sci, 9 (887-899):
  • [23] Experimental measurements of load and strip profile in thin strip rolling
    Sutcliffe, MPF
    Rayner, PJ
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1998, 40 (09) : 887 - 899
  • [24] A thermal model for the foil rolling process
    Luo, CH
    Keife, H
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1998, 74 (1-3) : 158 - 173
  • [25] Friction Model for Strip Rolling
    Feng-shan Du
    Gui-guo Wang
    Xin-liang Zang
    Xue-tong Li
    Journal of Iron and Steel Research International, 2010, 17 : 19 - 23
  • [26] Development of new hot rolling process for thin strip rolling
    Shimizu, Yoshinobu
    Iwatani, Jo
    Yamasaki, Yasukuni
    Takeguchi, Toru
    Kametani, Atsushi
    Technical Review - Mitsubishi Heavy Industries, 2000, 37 (02): : 45 - 47
  • [27] Friction Model for Strip Rolling
    DU Feng-shan1
    2.Laboratory of Metastable Materials Science and Technology
    JournalofIronandSteelResearch(International), 2010, 17 (07) : 19 - 23
  • [28] Friction Model for Strip Rolling
    Du Feng-shan
    Wang Gui-guo
    Zang Xin-liang
    Li Xue-tong
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2010, 17 (07) : 19 - +
  • [29] PREDICTION OF ROLLING FORCE USING AN ADAPTIVE NEURAL NETWORK MODEL DURING COLD ROLLING OF THIN STRIP
    Xie, H. B.
    Jiang, Z. Y.
    Tieu, A. K.
    Liu, X. H.
    Wang, G. D.
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2008, 22 (31-32): : 5723 - 5727
  • [30] PREDICTION OF ROLLING FORCE USING AN ADAPTIVE NEURAL NETWORK MODEL DURING COLD ROLLING OF THIN STRIP
    Xie, H. B.
    Jiang, Z. Y.
    Tieu, A. K.
    Liu, X. H.
    Wang, G. D.
    ENGINEERING PLASTICITY AND ITS APPLICATIONS: FROM NANOSCALE TO MACROSCALE, 2009, : 351 - +