A new fabrication process of Fe-based ribbon with creep-induced anisotropy

被引：11

作者：

Yanai, T ^{[1
]}

Ohya, T

Takahashi, KI

Nakano, M

Yoshizawa, Y

Fukunaga, H

机构：

[1] Nagasaki Univ, Grad Sch Sci & Technol, Fac Engn, Dept Mat Sci, Nagasaki 8528521, Japan

[2] Hitachi Met Ltd, Adv Elect Res Lab, Kumagaya 3600843, Japan

来源：

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS | 2005年 / 290卷

关键词：

anisotropy-stress induced; core loss; nanocrystalline materials; magnetization-rotation;

D O I：

10.1016/j.jmmm.2004.11.560

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Continuous stress-annealing process (CSA), in which a ribbon under tensile stress passes through a furnace, was carried out for obtaining long Fe-Cu-Nb-Si-B ribbons with creep-induced anisotropy. It was clarified that the creep-induced anisotropy K-uc is almost the same in magnitude for the moving velocity nu(m) range of 1-100cm/min at the annealing temperature of 530 degrees C, which suggests that a remarkable reduction in annealing time can be achieved. Furthermore, an increase in annealing temperature enabled us to increase nu(m) up to 275cm/min. Thus, CSA is an attractive method for applying ribbons with creep-induced anisotropy to mass production. (c) 2004 Elsevier B.V. All rights reserved.

引用

页码：1502 / 1505

页数：4

共 11 条

[1] Magnetic properties of compressed amorphous powder cores and their application to a fly-back converter [J].

Endo, I ;

Tatsumi, H ;

Otsuka, I ;

Yamamoto, H ;

Shintani, A ;

Koshimoto, H ;

Yagi, M ;

Murata, K .

IEEE TRANSACTIONS ON MAGNETICS, 2000, 36 (05) :3421-3423

[2] New soft magnetic material with constant and adjustable permeability [J].

Fukunaga, H ;

Ichiki, Y ;

Nakano, M ;

Ohta, Y ;

Kakehashi, H ;

Ogasawara, H .

IEEE TRANSACTIONS ON MAGNETICS, 1997, 33 (05) :3787-3789

[3] HIGH-PERFORMANCE CUT CORES PREPARED FROM CRYSTALLIZED FE-BASED AMORPHOUS RIBBON [J].

FUKUNAGA, H ;

EGUCHI, T ;

KOGA, K ;

OHTA, Y ;

KAKEHASHI, H .

IEEE TRANSACTIONS ON MAGNETICS, 1990, 26 (05) :2008-2010

[4] CORE LOSS IN AMORPHOUS CUT CORES WITH AIR GAPS [J].

FUKUNAGA, H ;

EGUCHI, T ;

OHTA, Y ;

KAKEHASHI, H .

IEEE TRANSACTIONS ON MAGNETICS, 1989, 25 (03) :2694-2698

[5] STRESS ANNEALING IN FE73.5CU1TA3SI13.5B9 AMORPHOUS ALLOY - INDUCED MAGNETIC-ANISOTROPY AND VARIATION OF THE MAGNETOSTRICTION CONSTANT [J].

GONZALEZ, J ;

MURILLO, N ;

BLANCO, JM ;

GONZALEZ, JM ;

KULIK, T .

JOURNAL OF APPLIED PHYSICS, 1994, 76 (02) :1131-1134

[6] CREEP INDUCED MAGNETIC-ANISOTROPY IN NANOCRYSTALLINE FE-CU-NB-SI-B ALLOYS [J].

HERZER, G .

IEEE TRANSACTIONS ON MAGNETICS, 1994, 30 (06) :4800-4802

[7]

HERZER G, 2003, Patent No. 6645314

[8] EFFECTS OF SURFACE CRYSTALLIZATION ON THE MAGNETIC-PROPERTIES IN IRON-RICH METALLIC GLASSES [J].

HILZINGER, HR ;

HERZER, G .

MATERIALS SCIENCE AND ENGINEERING, 1988, 99 :101-104

[9] Creep induced magnetic anisotropy in nanocrystalline Fe73.5Cu1Nb3Si13.5B9 [J].

Hofmann, B ;

Kronmuller, H .

NANOSTRUCTURED MATERIALS, 1995, 6 (5-8) :961-964

[10] MAGNETIC-ANISOTROPY IN AS-QUENCHED AND STRESS-ANNEALED AMORPHOUS AND NANOCRYSTALLINE FE73.5CU1NB3SI13.5B9 ALLOYS [J].

KRAUS, L ;

ZAVETA, K ;

HECZKO, O ;

DUHAJ, P ;

VLASAK, G ;

SCHNEIDER, J .

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 1992, 112 (1-3) :275-277

← 1 2 →