Experimental and simulation flow rate analysis of the 3/2 directional pneumatic valve

被引：2

作者：

Blasiak, Slawomir ^{[1
]}

Takosoglu, Jakub E. ^{[1
]}

Laski, Pawel A. ^{[1
]}

Pietrala, Dawid S. ^{[1
]}

Zwierzchowski, Jaroslaw ^{[1
]}

Bracha, Gabriel ^{[1
]}

Nowakowski, Lukasz ^{[1
]}

Blasiak, Malgorzata ^{[1
]}

机构：

[1] Kielce Univ Technol, Fac Mechatron & Mech Engn, Aleja Tysiaclecia Panstwa Polskiego 7, PL-25314 Kielce, Poland

来源：

EXPERIMENTAL FLUID MECHANICS 2016 (EFM16 ) | 2017年 / 143卷

关键词：

BOILING HEAT-TRANSFER; CFD ANALYSIS; CONTROLLER; FORCE; FIELD; SPOOL; MODEL;

D O I：

10.1051/epjconf/201714302008

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

The work includes a study on the comparative analysis of two test methods. The first method numerical method, consists in determining the flow characteristics with the use of ANSYS CFX. A modeled poppet directional valve 3/2 3D CAD software - SolidWorks was used for this purpose. Based on the solid model that was developed, simulation studies of the air flow through the way valve in the software for computational fluid dynamics Ansys CFX were conducted. The second method - experimental, entailed conducting tests on a specially constructed test stand. The comparison of the test results obtained on the basis of both methods made it possible to determine the cross-correlation. High compatibility of the results confirms the usefulness of the numerical procedures. Thus, they might serve to determine the flow characteristics of directional valves as an alternative to a costly and time-consuming test stand.

引用

页数：4

共 22 条

[1] AN ANALYSIS OF TENSILE TEST RESULTS TO ASSESS THE INNOVATION RISK FOR AN ADDITIVE MANUFACTURING TECHNOLOGY [J].

Adamczak, Stanislaw ;

Bochnia, Jerzy ;

Kaczmarska, Bozena .

METROLOGY AND MEASUREMENT SYSTEMS, 2015, 22 (01) :127-138

[2] Direct and inverse heat transfer in non-contacting face seals [J].

Blasiak, Slawomir ;

Pawinska, Anna .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2015, 90 :710-718

[3] A Numerical Analysis of the Temperature Distributions in Face Sealing Rings [J].

Blasiak, Slawomir ;

Kundera, Czeslaw ;

Bochnia, Jerzy .

XIIITH INTERNATIONAL SCIENTIFIC AND ENGINEERING CONFERENCE HERMETIC SEALING, VIBRATION RELIABILITY AND ECOLOGICAL SAFETY OF PUMP AND COMPRESSOR MACHINERY-HERVICON-2011, 2012, 39 :366-378

[4]

Gapinski D, 2014, J THEOR APP MECH-POL, V52, P629

[5] Design, modeling and fabrication of a constant flow pneumatic micropump [J].

Inman, Walker ;

Domansky, Karel ;

Serdy, James ;

Owens, Bryan ;

Trumper, David ;

Griffith, Linda G. .

JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2007, 17 (05) :891-899

[6] A problem of optimal cylindricity profile matching [J].

Janecki, D. ;

Zwierzchowski, J. ;

Cedro, L. .

BULLETIN OF THE POLISH ACADEMY OF SCIENCES-TECHNICAL SCIENCES, 2015, 63 (03) :771-779

[7] Design of a 3-DOF tripod electro-pneumatic parallel manipulator [J].

Laski, Pawel Andrzej ;

Takosoglu, Jakub Emanuel ;

Blasiak, Slawomir .

ROBOTICS AND AUTONOMOUS SYSTEMS, 2015, 72 :59-70

[8] Evaluation and compensation of steady gas flow force on the high-pressure electro-pneumatic servo valve direct-driven by voice coil motor [J].

Li, Baoren ;

Gao, Longlong ;

Yang, Gang .

ENERGY CONVERSION AND MANAGEMENT, 2013, 67 :92-102

[9] Three dimensional CFD analysis and experimental test of flow force acting on the spool of solenoid operated directional control valve [J].

Lisowski, E. ;

Czyzycki, W. ;

Rajda, J. .

ENERGY CONVERSION AND MANAGEMENT, 2013, 70 :220-229

[10] Vibrations in the Machining System of the Vertical Machining Center [J].

Miko, Edward ;

Nowakowski, Lukasz .

XIIITH INTERNATIONAL SCIENTIFIC AND ENGINEERING CONFERENCE HERMETIC SEALING, VIBRATION RELIABILITY AND ECOLOGICAL SAFETY OF PUMP AND COMPRESSOR MACHINERY-HERVICON-2011, 2012, 39 :405-413

← 1 2 3 →