Slipcasting of MAX phase tubes for nuclear fuel cladding applications

被引：16

作者：

Galvin, T. ^{[1
]}

Hyatt, N. C. ^{[1
]}

Rainforth, W. M. ^{[1
]}

Reaney, I. M. ^{[1
]}

Shepherd, D. ^{[2
]}

机构：

[1] Univ Sheffield, Dept Mat Sci & Engn, Sir Robert Hadfield Bldg,Mappin St, Sheffield S1 3JD, S Yorkshire, England

[2] NNL, NNL Preston Lab, Preston PR4 0XJ, Lancs, England

来源：

NUCLEAR MATERIALS AND ENERGY | 2020年 / 22卷

基金：

英国工程与自然科学研究理事会;

关键词：

MAX phase; Slipcast; Nuclear fuel; Clad; Ti3SiC2; NEUTRON-IRRADIATION; TI3SIC2; TI3ALC2; TI2ALC; OXIDATION; CORROSION; EVOLUTION; BEHAVIOR; CR2ALC;

D O I：

10.1016/j.nme.2020.100725

中图分类号：

TL [原子能技术]; O571 [原子核物理学];

学科分类号：

0827 ; 082701 ;

摘要：

As a proof of concept, tubes of Ti3SiC2 MAX phase were slipcast in order to investigate its potential for the fabrication of fuel cladding for nuclear reactors. A slip consisting of 46% dry weight basis (dwb) water, 4% dwb polyethyleneimine (PEI), 0.5% dwb methylcellulose was used to cast the tubes, which were then sintered for 2 h under vacuum at 1450 degrees C. Silicon loss was observed at surface which resulted in the formation of TiC. The hoop stress to destruction of the tubes was measured and achieved a maximum of 9.1 +/- 2.2 MPa/mm of tube thickness.

引用

页数：8

共 50 条

[41] Ceramic coating for corrosion (c3) resistance of nuclear fuel cladding
Alat, Ece
Motta, Arthur T.
Comstock, Robert J.
Partezana, Jonna M.
Wolfe, Douglas E.
SURFACE & COATINGS TECHNOLOGY, 2015, 281 : 133 - 143
[42] Simulation of Zircaloy and SiC cladding thermal performance of a nuclear fuel rod subassembly
Handa, Devanshi
Ray, Dipanjan
Munshi, Prabhat
Kalra, Manjeet Singh
ENGINEERING RESEARCH EXPRESS, 2022, 4 (02):
[43] Contribution to the understanding of brittle fracture conditions of zirconium alloy fuel cladding tubes during LOCA transient
Thieurmel, Ronan
Besson, Jacques
Pouillier, Edouard
Parrot, Aurore
Ambard, Antoine
Gourgues-Lorenzon, Anne-Francoise
JOURNAL OF NUCLEAR MATERIALS, 2019, 527
[44] Influence of Thermochemical Treatment on the Oxidation of Fuel Cladding Tubes Made of Zr-1% Nb Alloy
Voyevodin, V. M.
Fedirko, V. M.
Trush, V. S.
Luk'yanenko, O. H.
Stoev, P. I.
Panov, V. A.
Tykhonovsky, M. A.
MATERIALS SCIENCE, 2021, 56 (04) : 509 - 515
[45] On-line deformation measurements of nuclear fuel rod cladding using speckle interferometry
Fabert, M.
Gallais, L.
Pontillon, Y.
PROGRESS IN NUCLEAR ENERGY, 2014, 72 : 44 - 48
[46] Effects of furnace annealing on in situ reacted Ti2AlC MAX phase composite coatings deposited by laser cladding
Richardson, Peter
Cuskelly, Dylan
Brandt, Milan
Kisi, Erich
SURFACE & COATINGS TECHNOLOGY, 2021, 405
[47] CHARACTERIZATION OF ADVANCED STEELS AS ACCIDENT TOLERANT CLADDING FOR LIGHT WATER REACTOR NUCLEAR FUEL
Rebak, Raul B.
ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2015, VOL 6B, 2015,
[48] Fretting wear mechanism of nuclear fuel cladding tube under different tangential displacement
Li, Jialing
Shen, Huoming
Liao, Yehong
Wang, Yuxing
Jin, Songye
Peng, Zhenxun
Wang, Kaimo
Ren, Qisen
NUCLEAR ENGINEERING AND DESIGN, 2024, 429
[49] Fretting Wear Characteristics of Nuclear Fuel Cladding in High-Temperature Pressurized Water
Wang, Jun
Li, Haojie
Li, Zhengyang
Lei, Yujie
Ren, Quanyao
Jiao, Yongjun
Cai, Zhenbing
CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2023, 36 (01)
[50] True stress measurement of nuclear fuel rod cladding material subjected to DSA regime
Garg, A.
Panda, Biranchi Narayan
Tai, K.
NEURAL COMPUTING & APPLICATIONS, 2017, 28 : S119 - S126

← 1 2 3 4 5 →