Slipcasting of MAX phase tubes for nuclear fuel cladding applications

被引：16

作者：

Galvin, T. ^{[1
]}

Hyatt, N. C. ^{[1
]}

Rainforth, W. M. ^{[1
]}

Reaney, I. M. ^{[1
]}

Shepherd, D. ^{[2
]}

机构：

[1] Univ Sheffield, Dept Mat Sci & Engn, Sir Robert Hadfield Bldg,Mappin St, Sheffield S1 3JD, S Yorkshire, England

[2] NNL, NNL Preston Lab, Preston PR4 0XJ, Lancs, England

来源：

NUCLEAR MATERIALS AND ENERGY | 2020年 / 22卷

基金：

英国工程与自然科学研究理事会;

关键词：

MAX phase; Slipcast; Nuclear fuel; Clad; Ti3SiC2; NEUTRON-IRRADIATION; TI3SIC2; TI3ALC2; TI2ALC; OXIDATION; CORROSION; EVOLUTION; BEHAVIOR; CR2ALC;

D O I：

10.1016/j.nme.2020.100725

中图分类号：

TL [原子能技术]; O571 [原子核物理学];

学科分类号：

0827 ; 082701 ;

摘要：

As a proof of concept, tubes of Ti3SiC2 MAX phase were slipcast in order to investigate its potential for the fabrication of fuel cladding for nuclear reactors. A slip consisting of 46% dry weight basis (dwb) water, 4% dwb polyethyleneimine (PEI), 0.5% dwb methylcellulose was used to cast the tubes, which were then sintered for 2 h under vacuum at 1450 degrees C. Silicon loss was observed at surface which resulted in the formation of TiC. The hoop stress to destruction of the tubes was measured and achieved a maximum of 9.1 +/- 2.2 MPa/mm of tube thickness.

引用

页数：8

共 50 条

[31] Neutron Imaging Investigations of the Secondary Hydriding of Nuclear Fuel Cladding Alloys during Loss of Coolant Accidents
Grosse, M.
Roessger, C.
Stuckert, J.
Steinbrueck, M.
Kaestner, A.
Kardjilov, N.
Schillinger, B.
PROCEEDINGS OF THE 10TH WORLD CONFERENCE ON NEUTRON RADIOGRAPHY (WCNR-10), 2015, 69 : 436 - 444
[32] Thermochemical Embrittlement of the Zirconium Cladding of a Fuel Rod and Oxidative Recrystallization of the Fuel Material in the Course of Spent Nuclear Fuel Reprocessing
Metalidi, M. M.
Shapovalov, S. V.
Ismailov, R. V.
Skriplev, M. I.
Beznosyuk, V. I.
Fedorov, Yu. S.
RADIOCHEMISTRY, 2015, 57 (01) : 98 - 102
[33] RESEARCH AND DEVELOPMENT OF NOVEL MATERIALS FOR ACCIDENT TOLERANT FUEL CLADDING OF NUCLEAR REACTORS
Lobach, Kostiantyn, V
Kuprin, Oleksandr S.
Sayenko, Sergiy Yu
Voyevodin, Victor M.
Kolodiy, Igor, V
EAST EUROPEAN JOURNAL OF PHYSICS, 2020, (04): : 75 - 83
[34] Influence of Thermochemical Treatment on the Oxidation of Fuel Cladding Tubes Made of Zr – 1% Nb Alloy
V. M. Voyevodin
V. M. Fedirko
V. S. Trush
O. H. Luk’yanenko
P. I. Stoev
V. A. Panov
M. А. Tykhonovsky
Materials Science, 2021, 56 : 509 - 515
[35] SiC coating as hydrogen permeation reduction and oxidation resistance for nuclear fuel cladding
Usui, Takahiro
Sawada, Akihiko
Amaya, Masaki
Suzuki, Akihiro
Chikada, Takumi
Terai, Takayuki
JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, 2015, 52 (10) : 1318 - 1322
[36] Friction and Wear Properties of Cr-Nx Coatings for Nuclear Fuel Cladding
Qu, Zheng
Shang, Guixiao
Ma, Siyuan
Meng, Chuiyi
Xie, Peng
Wang, Hui
An, Xuguang
He, Xiujie
COATINGS, 2022, 12 (02)
[37] Cladding stress during extended storage of high burnup spent nuclear fuel
Raynaud, Patrick A. C.
Einziger, Robert E.
JOURNAL OF NUCLEAR MATERIALS, 2015, 464 : 304 - 312
[38] Rupture behaviour of nuclear fuel cladding during loss-of-coolant accident
Suman, Siddharth
Khan, Mohd. Kaleem
Pathak, Manabendra
Singh, R. N.
Chakravartty, J. K.
NUCLEAR ENGINEERING AND DESIGN, 2016, 307 : 319 - 327
[39] Accident-Tolerant Barriers for Fuel Road Cladding of CANDU Nuclear Reactor
Diniasi, Diana
Fulger, Manuela
Butoi, Bogdan
Dinca, Paul Pavel
Golgovici, Florentina
COATINGS, 2023, 13 (10)
[40] Understanding Corrosion and Hydrogen Pickup of Zirconium Fuel Cladding Alloys: The Role of Oxide Microstructure, Porosity, Suboxides, and Second-Phase Particles
Hu, Jing
Setiadinata, Brian
Aarholt, Thomas
Garner, Alistair
Vilalta-Clemente, Arantxa
Partezana, Jonna M.
Frankel, Philipp
Bagot, Paul
Lozano-Perez, Sergio
Wilkinson, Angus
Preuss, Michael
Moody, Michael
Grovenor, Chris
ZIRCONIUM IN THE NUCLEAR INDUSTRY: 18TH INTERNATIONAL SYMPOSIUM, 2018, 1597 : 93 - 126

← 1 2 3 4 5 →